Topic: 69 Coupe dual exhaust bracket factory part numbers

[66RavenGTCoupe]

Hi everyone,

I'm after the correct factory codes (not aftermarket codes) for the 69 dual exhaust upside-down "Y" hanger brackets that mount up under the seat. The ones with two metal brackets joined by a rubber strap. Need to buy a new set but must be NOS.

Thanks.

[Bob Gaines]

Hi everyone,

I'm after the correct factory codes (not aftermarket codes) for the 69 dual exhaust hanger brackets that mount up close to the tips. Need to buy a new set but must be NOS.

Thanks.

No engineering numbers on the brackets . check out Scott Fuller reproductions. http://www.scottfullerreproductions.com/1969_exhaust_options.html    He has picture comparisons next to originals.

[J_Speegle]

Are these the ones your looking for?


http://www.scottfullerreproductions.com/catalog/item/4595229/10077180.htm

As Bob eluded to - you'll pay a premium for a paper sticker on a NOS part only to have to peal it off before you install the part and i will possibly be as rusty as a good used one

The three piece brackets (one for each side) are listed in an older MPC as

      Drivers -------------------Passenger
C5ZZ-5260-F-----------------C5ZZ-5260-F
C7ZZ-5277-A-----------------C7ZZ-5277-A
C8zz-or C7ZZ-5A231-B-------C7ZZ-5266-A

Bracket- insulator and J bracket

[66RavenGTCoupe]

No Sorry Jeff. I have improved on my description in the initial post.

[J_Speegle]

I'm after the correct factory codes (not aftermarket codes) for the 69 dual exhaust upside-down "Y" hanger brackets that mount up under the seat.

The 69 didn't use a "Y" shaped muffler hanger - believe that was 70- 73 on dual exhaust. So not sure if you want the 70 - up part number or the 69 "other style" one (Shown below)



Right part - wrong finish