« previous next »
Pages: [1]   Go Down

Author Topic: smog pump fan  (Read 1293 times)

Offline 266ks

  • Newbie
  • *
  • Posts: 29
smog pump fan
« on: March 09, 2014, 02:11:43 PM »
What is the best way to install the plastic fan onto the smog pump splines? It looks like it could be easily broken.  Thanks for any help
Logged

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24630
Re: smog pump fan
« Reply #1 on: March 09, 2014, 09:02:40 PM »
Center it on the center shaft and line up the bolt hoses. Place the pulley on the pump then tighten the bolts down slowly (using a cross pattern to do so) until the fan is seated.



That is what has worked for me ;)

BTW for others viewing this post
A site member has been working on an article for the Library here on rebuilding the Thermactor pumps and we're in final review :)
Logged
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline 266ks

  • Newbie
  • *
  • Posts: 29
Re: smog pump fan
« Reply #2 on: March 09, 2014, 11:11:26 PM »
Thanks Jeff, I had thought that might work but wanted advice before I did. 
Logged
Pages: [1]   Go Up
« previous next »