Author Topic: 66 Wiring harness  (Read 1630 times)

Offline ChrisV289

  • Hero Member
  • *****
  • Posts: 1965
66 Wiring harness
« on: March 07, 2014, 12:42:44 AM »
Helping a friend of mine restore a 66 San Jose Coupe built in Jan 66 (sheet metal from 11/65 and 12/65).  He has the original wiring harness but for some reason the car never had the emergency flasher in the glove box and there are no connections in the main harness.  I always though this was standard on 66 cars.  Was this implemented later in production?  And would they have put a 65 GT harness in the car to accommodate for the gauges and no flasher?
Chris
1965 Honey Gold Fastback (SJ 10/29/64)
1965 Caspian Blue Fastback (SJ 06/03/65)
2009 V6 Mustang Coupe

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7687
Re: 66 Wiring harness
« Reply #1 on: March 07, 2014, 12:48:15 AM »
I believe the early '66 cars would have had a non-integral emergency flasher setup with a separate wiring harness.  Later '66 had the wiring made into the main harness and a plug-in switch.  The early style switch had integral wiring.
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline midlife

  • Wiring Guru---let me check your shorts!
  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2175
    • Midlife Harness Restorations
Re: 66 Wiring harness
« Reply #2 on: March 07, 2014, 08:03:43 AM »
+1.  Yup.


Midlife Harness Restorations - http://midlifeharness.com

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7687
Re: 66 Wiring harness
« Reply #3 on: March 08, 2014, 12:55:35 AM »
The MPC shows a 3/1/66 changeover date. 
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline bryancobb

  • Silver Level Subscriber
  • Hero Member
  • ****
  • Posts: 1077
  • 2009 Ridn' Around
Re: 66 Wiring harness
« Reply #4 on: March 09, 2014, 08:40:02 AM »
My MAR 15 Metuchen car has integral wiring and the glovebox switch.  It is definitely on the "after changeover" list.
66 Metuch Conv
Nightmist, Std Blu Int
6T08C223904    76A       K         22       15c     21      6        6
                      BODY  COLOR   TRIM    DATE   DSO   AXLE  XMSN
   C/O  785                                   (rotation #)
   16    C14   6T08C223904        (weld bay 16, bucked MAR 14)

Offline TFrancis

  • Newbie
  • *
  • Posts: 4
Re: 66 Wiring harness
« Reply #5 on: March 12, 2014, 01:50:48 AM »
So it's my car that Chris was originally asking about.  Not only did the original wiring harness not include the flashers, but there's no evidence there was ever a switch in the glove box.  When my Dad bought it used in 1969, it had flasher controls under the dash (see attached picture).  Is this possibly a dealer installed item or the creativity of the previous owner?



Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24628
Re: 66 Wiring harness
« Reply #6 on: March 12, 2014, 11:21:10 PM »
............Is this possibly a dealer installed item or the creativity of the previous owner?

IF it was dealer installed then the original owner got taken to the cleaners since the car should have had the flashers (required by law) It may have been (now that we've seen the box) that the PO added t or had someone add the fader (along with one or more additional speakers) and since it had the ability to do the flasher control also they disconnected, spliced in (nice tape job there)  and removed the factory stuff.

Never seen a controller like this - Ford/Rotunda or aftermarket in the period catalogs that I recall. Do have plenty of 66 San Jose cars built before yours and after with the normal factory four way flashers installed
Jeff Speegle

Anything worth doing is worth doing concours ;)