Author Topic: Standard equipment for GT/GTAs?  (Read 5055 times)

Offline midlife

  • Wiring Guru---let me check your shorts!
  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2175
    • Midlife Harness Restorations
Standard equipment for GT/GTAs?
« on: December 27, 2013, 10:10:30 PM »
I had a underdash harness customer a few weeks ago that sent me his Marti Report for his GT.  The report did not include a tach dash configuration.  The Mustang Recognition Guide does not talk about dashes with tachs in the GT/GTA section.  Marti's By The Numbers lists an incredibly low number of tachs selected for both 1967 and 1968, although I have refurbished a higher percentage of tach harnesses than what his numbers indicate. 

All of this leads me to speculate that GT's/GTA's came standard with tach dashes.  True or False?
Midlife Harness Restorations - http://midlifeharness.com

Offline 67gta289

  • Hero Member
  • *****
  • Posts: 3080
Re: Standard equipment for GT/GTAs?
« Reply #1 on: December 27, 2013, 10:43:10 PM »
Wish it were true, but alas it isn't.  Second owner GTA, no tach, Marti report supports.  I'm always looking at the 67 GT/GTA cars and can say that the tach option is very rare.  Seems to me that included is the resettable trip odometer.
John
67 289 GTA Dec 20 1966 San Jose
7R02C156xxx
MCA 74660

Offline ruppstang

  • Hero Member
  • *****
  • Posts: 3936
Re: Standard equipment for GT/GTAs?
« Reply #2 on: December 27, 2013, 11:19:33 PM »
John is correct. Our 67 GTA has no Tach, it was a separate option.

Offline Brian Conway

  • Hero Member
  • *****
  • Posts: 1623
Re: Standard equipment for GT/GTAs?
« Reply #3 on: December 28, 2013, 10:47:10 AM »
     Might be connected to the 4 speed transmission GT cars ?  Much the same as the 69 staggered shocks.  This picture is of a friends March 68, SJ, 4 speed, 390, GT car.  I have the Marti and it does not list the tach as an option. 
« Last Edit: December 29, 2013, 09:17:05 AM by Brian Conway »
5RO9A GT  4 Spd Built 5/29/65
9TO2R SCJ 4 Spd Built 9/19/68
Owner Driver Mechanic
San Diego, Ca.

Offline ruppstang

  • Hero Member
  • *****
  • Posts: 3936
Re: Standard equipment for GT/GTAs?
« Reply #4 on: December 28, 2013, 02:49:16 PM »
     Might be connected to the 4 speed transmission GT cars ?  Much the same as the 69 staggered shocks.  This picture is of a friends March 68, SJ, 4 speed car.  I have the Marti and it does not list the tach as an option.
Yes in 68 Ford did offer a 4spd/ tach option.

Offline Oz390

  • Hero Member
  • *****
  • Posts: 729
Re: Standard equipment for GT/GTAs?
« Reply #5 on: December 29, 2013, 07:00:38 AM »
Have a '68 S code 4 speed GT, San Jose Dec '67 build.  Has the tach, but not listed on the Marti so presume it either came standard with the 4 speed or the GT option in '68...
8R03S : 76A I 2A 15M 72 5 U
8R01S : 65A B 2A 28M 72 7 5 - Factory GT
8R01C : 65A M 2A 01E 72 2 W - Cal Special
8F01X : 65A I 2A 2G 20E 24 1 U - EXP500 repli-bute

Offline rocnhrse

  • Full Member
  • ***
  • Posts: 135
Re: Standard equipment for GT/GTAs?
« Reply #6 on: December 29, 2013, 09:12:33 AM »
67GTA  S code SJ April 67 deluxe interior no tach in my dash either, just a nice clock,
 I am more surprised that these cars didn't come with a limited slip rear end
67 mustang  GTA  S code fastback  San Jose  April 67

Offline nham3407

  • Sr. Member
  • ****
  • Posts: 465
Re: Standard equipment for GT/GTAs?
« Reply #7 on: December 29, 2013, 01:31:21 PM »
My 67 SJ,GT, 390, 4-spd includes a tach, but also does not list it seperatly on the Marti Report.  This is a June 67 buid date.
67 GT S-Code, San Jose, 06/67
72 Mach 1, Dearborn, 01/72
68 Merc. Cyclone, Lorain, 12/67 (Red)
68 Merc. Cyclone, Lorain, 6/68 (White)

Offline sportyworty

  • Full Member
  • ***
  • Posts: 193
Re: Standard equipment for GT/GTAs?
« Reply #8 on: December 29, 2013, 06:43:56 PM »
Tach was std equip on 4sp 68-69

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7687
Re: Standard equipment for GT/GTAs?
« Reply #9 on: December 29, 2013, 08:01:02 PM »
Tach was std equip on 4sp 68-69

GT/GTA's with 4sp only?  I have a '68 289 (c-code) 4 speed convertible and it did not have a tach.
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline hopeto

  • Full Member
  • ***
  • Posts: 187
Re: Standard equipment for GT/GTAs?
« Reply #10 on: December 29, 2013, 08:08:19 PM »
My 67 GT K Code, 4 speed (export to Guatemala) has an 8G tach.
Not listed on Marti.
Note speedometer is in Kilometers.
« Last Edit: December 29, 2013, 08:11:23 PM by hopeto »
Original one owner 84 GT Convertible with 1800 miles. 65 Silver Smoke Gray K Code GT Coupe - 65 Cyclone - 67 Vintage Burgundy K Code GT Coupe.  1970 Calypso Corral Boss 302 - 2012 Yellow Blaze Boss 302.

Offline midlife

  • Wiring Guru---let me check your shorts!
  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2175
    • Midlife Harness Restorations
Re: Standard equipment for GT/GTAs?
« Reply #11 on: December 29, 2013, 09:29:32 PM »
Wow...so some 67's and some 68's came with a tach (with or without a 4 speed) and no mention on the Marti report.  Very strange indeed.

I would have thought that someone had a complete list of options for 67/68 and could explain that a tach was a part of some RPO options.

Even stranger is that the particular harness in question had a rear defogger wiring built into the harness (apparently unused) because that wasn't mentioned in the Marti Report. 
Midlife Harness Restorations - http://midlifeharness.com

Offline ruppstang

  • Hero Member
  • *****
  • Posts: 3936
Re: Standard equipment for GT/GTAs?
« Reply #12 on: December 29, 2013, 10:34:49 PM »
Here is a page from the Mustang section of the 68 Ford Option Sales Catalogue.
In the center column it offers the 4spd/tach option. and below it offers a 4spd option alone.

Offline 70cj428

  • Sr. Member
  • ****
  • Posts: 314
Re: Standard equipment for GT/GTAs?
« Reply #13 on: January 03, 2014, 01:24:35 PM »
I thought in 68/69 that big block 4 speed cars got the tach automatically with the 4 speed option, the tach was an option for R code 4 speeds in 1970. What isn't so clear is whether S code 68's got a 6K or 8K tach's ( my 68 S code came with an 8K tach but I've seen them both ways....)

Offline ruppstang

  • Hero Member
  • *****
  • Posts: 3936
Re: Standard equipment for GT/GTAs?
« Reply #14 on: January 03, 2014, 09:11:15 PM »
I thought in 68/69 that big block 4 speed cars got the tach automatically with the 4 speed option, the tach was an option for R code 4 speeds in 1970. What isn't so clear is whether S code 68's got a 6K or 8K tach's ( my 68 S code came with an 8K tach but I've seen them both ways....)
I do  not know about 69's but that is not true of 68's.  We have discussed the tach issue a number of times on several forums. It seems like we see the 6K tachs in earlier cars, I think the assembly plants used the 6K's till they were gone. The big blocks really did not need a 8K tach. I think it was just more efficient for Ford to just provide the 8K in all engines.