Author Topic: 65 Mustang 9 inch backing plates  (Read 3952 times)

Offline 65fastbk

  • Full Member
  • ***
  • Posts: 122
65 Mustang 9 inch backing plates
« on: December 08, 2013, 04:31:45 PM »
Hi,

Im just had my axle bearings replaced and was about to start cleaning up the backing plates...These are the numbers I see on each backing plate:

70398 k/h
70399 k/h

Is this correct for a 65 nine inch?

Thanks!

Offline suskeenwiske

  • Sr. Member
  • ****
  • Posts: 417
  • 214-347-3628
Re: 65 Mustang 9 inch backing plates
« Reply #1 on: December 08, 2013, 05:45:39 PM »
Though from a 1966 Fairlane, it has a 9" Differential and the Backing Plates are marked 70398 and 70399 as follows:

70398   70399
   KH        KH

This may lend some credence but we'll need an expert to confirm that your numbers apply to your specific application.

Ray
« Last Edit: December 08, 2013, 06:13:01 PM by suskeenwiske »
Ray
1965 Dearborn Coupe
6 Cylinder, AT, PB, PS, AC
Est. Build 23A

Offline 65fastbk

  • Full Member
  • ***
  • Posts: 122
Re: 65 Mustang 9 inch backing plates
« Reply #2 on: December 08, 2013, 05:53:45 PM »
Though from a 1966 Fairlane, it has a 9" Differential and the Backing Plates are marked 70398 and 70399 as follows:

70398   70399
   KH        KH

This may lend some credence but we'll need an expert to confirm.

Ray

Thanks. What should a 65 mustang backing 9 inch backing plate be?

70867 k/h
70866 k/h

This is a July 65 k car.

Offline suskeenwiske

  • Sr. Member
  • ****
  • Posts: 417
  • 214-347-3628
Re: 65 Mustang 9 inch backing plates
« Reply #3 on: December 11, 2013, 10:21:00 PM »
I don't know for sure what the correct numbers are, my example was from a different car and year. For all I know, the Fairlane may have had a rear end change.

I don't know what the new numbers you posted are from...we really need an expert in on this one, hopefully someone will reply.

Sorry, wish I could be of more help.

Ray
Ray
1965 Dearborn Coupe
6 Cylinder, AT, PB, PS, AC
Est. Build 23A

Offline krelboyne

  • Hero Member
  • *****
  • Posts: 1225
    • West Coast Classic Cougars
Re: 65 Mustang 9 inch backing plates
« Reply #4 on: December 11, 2013, 10:50:53 PM »
Thanks. What should a 65 mustang backing 9 inch backing plate be?

70867 k/h
70866 k/h

This is a July 65 k car.

The 70866/70867 are Kelsey/Hayes numbers. Those equate to backing plates for 10 inch drums with 1-3/4 inch brake shoes. 10 inch drums can be found on 8 or 9 inch rear ends from various years on various Fords.

The 71085/71086 are Kelsey/Hayes numbers. Those equate to backing plates for 10 inch drums with 2 inch brake shoes. 10 inch drums can be found on 8 or 9 inch rear ends form various years on various Fords.
Scott Behncke - Carcheaologist
West Coast Classic Cougars
503-463-1130
1968 GT/CS 302-4V San Jose 05B
1968 Cougar XR7 Dearborn 09A

Offline sgl66

  • Sr. Member
  • ****
  • Posts: 463
Re: 65 Mustang 9 inch backing plates
« Reply #5 on: December 17, 2014, 05:43:39 PM »
Thanks. What should a 65 mustang backing 9 inch backing plate be?

70867 k/h
70866 k/h

This is a July 65 k car.
+1

From Oct 65 k car.

Not only backing plates but also KH/Ford stamped parts...whatever these are called

RH 47852
LH 47853
The piece that goes between both sides is 47855


66 GT 6T09K12---- scheduled Oct 14, bucked Oct 13 '65