Topic: mixed up some fasteners help

[original68]

hello all i have a 68 fastback and mix up some baggies during disassembly.  tried to id the bolt in photo #1 it has a unique washer and the AMK part that it looks identical to # is 384931-s. i tried to cross reference this # in the assembly manual with no luck and picture #2 the metal bracket i can't remember where it goes or any of the pictured fasteners .  i thought under the dash. can anyone help id where these parts go. thank you for all your help


ok found all of picture#2 they are attached to brake peddle bracket

[ruppstang]

The bracket holds the flasher and attaches to the dash support. The small screw should attach it. I think the hair pin retains the pulley pin on the E brake. The  three bolts and nuts may attach the bracket that the clutch return spring hooks on also on the dash support the nut could retain the E brake to fire wall. should be two. My best guesses.
 I just hate that when you have extra parts! LOL

[J_Speegle]

Don't recall any of the bolts shown in picture #1 on a 68. HAd some similar ones on a 71

[jwc66k]

The bolt in picture 1 is typical of those used in 1971 thru 1973 in the engine compartment for body parts. As to the rest, a diameter, threads per inch and length would be beneficial.
Jim

[original68]

the bolt is 1 1/8 long and is  5/16- 18 threads

[jwc66k]

the bolt is 1 1/8 long and is  5/16- 18 threads

That bolt was not used on your Mustang, the lock washer style was the giveaway. It was the others that I requested some dimensions so I can possibly provide an application.
Jim

[original68]

thanks jim i will put them aside