Author Topic: Correct detail for 1964 1/2 leaf springs  (Read 1981 times)

Offline Hipo giddyup

  • Hero Member
  • *****
  • Posts: 1207
  • There is no end to doing right. Giddyup!!!
Correct detail for 1964 1/2 leaf springs
« on: September 12, 2013, 08:57:52 AM »
 I am getting close to replacing the rear leaf springs on my 64 1/2 and was wondering about the correct details of the springs. The car is a 1964 June built Dearborn coupe with a 260 V8 and 3 speed. Can anyone tell me if the springs should be natural or black, and if black, then flat, gloss, or satin? Also, what identifying srtipes should be on them if any? I have seen specific color stripes on other restored cars that denote type and weight limit?  Also spacing distance of the stripes would be helpful too. Thanks! ;D
1967 Springtime Yellow Coupe, 289 2v 3spd, Metuchen built, Nov. 17th 66'
1966 Sahara Beige Coupe, 289 2v 3spd, Dearborn built, July 21st 66'
1964 1/2 Pagoda Green Coupe, 260 2v 3spd, Dearborn built, June 30th 64'
1966 GT350 Fastback clone, 289 HiPo, 725cfm Holley, 4spd, SanJose built, Nov 25th 65'

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7687
Re: Correct detail for 1964 1/2 leaf springs
« Reply #1 on: September 12, 2013, 02:45:10 PM »
They would be natural with a dark heat-treated appearance and plain steel clamps.

The markings may have been stripes or spray dots, depends on what was going on during that time of production and assembly plant.  Getting the finish of the springs and clamps is more important than the paint markings.
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline Hipo giddyup

  • Hero Member
  • *****
  • Posts: 1207
  • There is no end to doing right. Giddyup!!!
Re: Correct detail for 1964 1/2 leaf springs
« Reply #2 on: September 12, 2013, 08:34:02 PM »
I can strip the new set of springs of their black paint but how could you duplicate the heated look?
1967 Springtime Yellow Coupe, 289 2v 3spd, Metuchen built, Nov. 17th 66'
1966 Sahara Beige Coupe, 289 2v 3spd, Dearborn built, July 21st 66'
1964 1/2 Pagoda Green Coupe, 260 2v 3spd, Dearborn built, June 30th 64'
1966 GT350 Fastback clone, 289 HiPo, 725cfm Holley, 4spd, SanJose built, Nov 25th 65'

Offline ChrisV289

  • Hero Member
  • *****
  • Posts: 1965
Re: Correct detail for 1964 1/2 leaf springs
« Reply #3 on: September 12, 2013, 08:45:06 PM »
Have you tried soaking them in evaporust to see if maybe the stripes/dots will show themselves...
Chris
1965 Honey Gold Fastback (SJ 10/29/64)
1965 Caspian Blue Fastback (SJ 06/03/65)
2009 V6 Mustang Coupe

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24623
Re: Correct detail for 1964 1/2 leaf springs
« Reply #4 on: September 12, 2013, 11:04:07 PM »
I can strip the new set of springs of their black paint but how could you duplicate the heated look?

Did you try the search feature?   Think its been covered. IF not we can revisit that subject
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline Hipo giddyup

  • Hero Member
  • *****
  • Posts: 1207
  • There is no end to doing right. Giddyup!!!
Re: Correct detail for 1964 1/2 leaf springs
« Reply #5 on: September 13, 2013, 10:27:15 AM »
 Hmmm. Not finding anything when I search here?? As for the evaporust question, the original springs are VERY pitted and I'm not even sure I can read a part number on the bottom of them, (I was thinking of reusing the main spring with the part number by having the local spring shop replace it with the main from the aftermarket springs). I will try to decipher any markings once they are off the car but was looking for the easy way out if someone else had already found this.  ;D
1967 Springtime Yellow Coupe, 289 2v 3spd, Metuchen built, Nov. 17th 66'
1966 Sahara Beige Coupe, 289 2v 3spd, Dearborn built, July 21st 66'
1964 1/2 Pagoda Green Coupe, 260 2v 3spd, Dearborn built, June 30th 64'
1966 GT350 Fastback clone, 289 HiPo, 725cfm Holley, 4spd, SanJose built, Nov 25th 65'

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24623
Jeff Speegle

Anything worth doing is worth doing concours ;)