Topic: 69 Dearborn Speedometer Cable Routing

[G Wood]

Other posts I have reviewed helped me locate the firewall location for the bracket that holds the speedometer cable on a 4 speed car. I cannot find information or photos that show the location for the two clips that mount somewhere on the floor boards or transmission tunnel. Can someone assist.

[specialed]

should be a hole on rh floorpan at end of tunnel area where it curves to firewall & nobody makes that clip holder correct so have to use old clip over.  Automatic car cable routes on lh side floorpan

[G Wood]

Thanks, I have 2 clips on my cable so I assume there is another hole that I should be looking for? Do you roughly where the other is located?

[Brian Conway]

     My car only has two attaching clips.  One at the lower engine compartment fire wall and the other that 'specialed' referenced.  I also have a drag pack reducer if that makes any difference.  Brian

[G Wood]

thanks very much, this answers my question.

[TLea]

     My car only has two attaching clips.  One at the lower engine compartment fire wall and the other that 'specialed' referenced.  I also have a drag pack reducer if that makes any difference.  Brian

Thats not the original style clip. Usually one under prop valve also where cable exits firewall

[Brian Conway]

[quote author=TLea
Thats not the original style clip. Usually one under prop valve also where cable exits firewall

I don't think so.  Brian

[Wade429]

Speedo cable routing. Pictures courtesy of  "DeadNutsOn"