Author Topic: 65-66 GT Rear Exhaust Hangers  (Read 3217 times)

Offline bryancobb

  • Silver Level Subscriber
  • Hero Member
  • ****
  • Posts: 1077
  • 2009 Ridn' Around
65-66 GT Rear Exhaust Hangers
« on: February 03, 2010, 09:38:41 PM »
Charles,

I have two new (GT) exhaust hanger brackets that bolt on the rear frame rails just in front of the rear spring shackle.  One is longer (Suffix B), one is shorter (Suffix A), which is left and which is right?

Bryan
« Last Edit: February 08, 2010, 09:01:11 PM by J_Speegle »
66 Metuch Conv
Nightmist, Std Blu Int
6T08C223904    76A       K         22       15c     21      6        6
                      BODY  COLOR   TRIM    DATE   DSO   AXLE  XMSN
   C/O  785                                   (rotation #)
   16    C14   6T08C223904        (weld bay 16, bucked MAR 14)

Offline midlife

  • Wiring Guru---let me check your shorts!
  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2175
    • Midlife Harness Restorations
Re: GT Rear Exhaust Hangers
« Reply #1 on: February 03, 2010, 09:47:33 PM »
On the left side, the exhaust pipe is closer to the frame rail than on the left side, so I would think the shorter version (A) goes on the left.
Midlife Harness Restorations - http://midlifeharness.com

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7687
Re: GT Rear Exhaust Hangers
« Reply #2 on: February 03, 2010, 10:37:00 PM »
On the left side, the exhaust pipe is closer to the frame rail than on the left side, so I would think the shorter version (A) goes on the left.


+1, Just hold them up to the car and it will be self-explanatory!   :)
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline bryancobb

  • Silver Level Subscriber
  • Hero Member
  • ****
  • Posts: 1077
  • 2009 Ridn' Around
Re: GT Rear Exhaust Hangers
« Reply #3 on: February 04, 2010, 05:22:58 AM »
Thanks gentlemen!
66 Metuch Conv
Nightmist, Std Blu Int
6T08C223904    76A       K         22       15c     21      6        6
                      BODY  COLOR   TRIM    DATE   DSO   AXLE  XMSN
   C/O  785                                   (rotation #)
   16    C14   6T08C223904        (weld bay 16, bucked MAR 14)

Offline midlife

  • Wiring Guru---let me check your shorts!
  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2175
    • Midlife Harness Restorations
Re: GT Rear Exhaust Hangers
« Reply #4 on: February 04, 2010, 09:58:09 PM »
Thanks gentlemen!

Hey!  Am I being insulted here?  *G*
Midlife Harness Restorations - http://midlifeharness.com

Offline bryancobb

  • Silver Level Subscriber
  • Hero Member
  • ****
  • Posts: 1077
  • 2009 Ridn' Around
Re: 65-66 GT Rear Exhaust Hangers
« Reply #5 on: February 11, 2010, 09:29:34 AM »
Just thought I needed to clarify to avoid getting FLAMED!
I AM NOT TRYING TO CONVERT MY C-CODE INTO A FAKE GT!
I am just going to put Arvinode exhaust on it in a way that it looks just like Ford did it on the assembly line.

66 Metuch Conv
Nightmist, Std Blu Int
6T08C223904    76A       K         22       15c     21      6        6
                      BODY  COLOR   TRIM    DATE   DSO   AXLE  XMSN
   C/O  785                                   (rotation #)
   16    C14   6T08C223904        (weld bay 16, bucked MAR 14)