Author Topic: 1969 Radio receiver hood bonding strap  (Read 6093 times)

Offline 351tony

  • Newbie
  • *
  • Posts: 15
1969 Radio receiver hood bonding strap
« on: October 15, 2012, 07:34:21 PM »
G,Day
We are looking for a 1969 Radio receiver hood bonding strap NOS or Repo
Does anyone know who sells them.
Cheers Tony.


5T09A  GT 4spd Built 7/13/65
9T02R  SCJ 4spd Built 3/25/69

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24628
Re: 1969 Radio receiver hood bonding strap
« Reply #1 on: October 15, 2012, 08:45:26 PM »
G,Day
We are looking for a 1969 Radio receiver hood bonding strap NOS or Repo
Does anyone know who sells them.
Cheers Tony.

Have you checked Virgina Mustang's or NPD's online catalogs to see if they are being reproduced??  IF they are being reproduced one of those two will show them in their catalog

As for NOS - not sure if they would look like the originals. Should not be a difficult part to find used - just would require a little clean up on your part ;)
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline 69RavenConv

  • Full Member
  • ***
  • Posts: 101
  • Owner since '74
Re: 1969 Radio receiver hood bonding strap
« Reply #2 on: October 15, 2012, 11:24:21 PM »
West Coast Classic Cougar has them.
Phil
'69 Convertible - Dearborn June 4, 1969 - Raven Black & Red - 302-2V

Offline specialed

  • Hero Member
  • *****
  • Posts: 1095
Re: 1969 Radio receiver hood bonding strap
« Reply #3 on: October 16, 2012, 03:48:27 PM »
Nos ones only came in radio kits.

Offline drummingrocks

  • Hero Member
  • *****
  • Posts: 1291
Re: 1969 Radio receiver hood bonding strap
« Reply #4 on: October 20, 2012, 01:50:05 PM »
West Coast Classic Cougar has them.

According to their website, they're out of stock.
Too much junk, too little time.

Offline 69RavenConv

  • Full Member
  • ***
  • Posts: 101
  • Owner since '74
Re: 1969 Radio receiver hood bonding strap
« Reply #5 on: October 21, 2012, 01:21:17 AM »
The 69/70 part shows available, unless I'm misunderstanding the part in question.

http://www2.cougarpartscatalog.com/69grndstrap.html

Phil
'69 Convertible - Dearborn June 4, 1969 - Raven Black & Red - 302-2V

Offline Dads Boss

  • Newbie
  • *
  • Posts: 32
Re: 1969 Radio receiver hood bonding strap
« Reply #6 on: October 21, 2012, 08:45:32 PM »
How were these plated?

Offline 69RavenConv

  • Full Member
  • ***
  • Posts: 101
  • Owner since '74
Re: 1969 Radio receiver hood bonding strap
« Reply #7 on: October 21, 2012, 10:22:00 PM »
They're brass, I believe (Looks like brass to me)
Phil
'69 Convertible - Dearborn June 4, 1969 - Raven Black & Red - 302-2V

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7346
Re: 1969 Radio receiver hood bonding strap
« Reply #8 on: October 21, 2012, 10:57:08 PM »
Most likely hard copper, and not plated.
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline Dads Boss

  • Newbie
  • *
  • Posts: 32
Re: 1969 Radio receiver hood bonding strap
« Reply #9 on: October 22, 2012, 08:08:45 PM »
I'm assuming that these were not found on a 1970 then???

Offline Andrew@MagMustangs

  • Sr. Member
  • ****
  • Posts: 335
  • MagMustangs: Original Parts for 64 1/2-73 Mustangs
    • MagMustangs
Re: 1969 Radio receiver hood bonding strap
« Reply #10 on: October 22, 2012, 08:54:03 PM »
I'm assuming that these were not found on a 1970 then???
They are correct for All 69-70 cars, Except Radio Delete. All Cars with Radio should have one. It mounts at the Far RH Front Edge of the Cowl Grille Panel.
MagMustangs: Vintage Mustang Enthusiasts. We have Original Factory Parts for 1964 1/2-1973 Ford Mustang.   Like Us On Facebook. https://www.facebook.com/MagMustangs

Offline Brian Conway

  • Hero Member
  • *****
  • Posts: 1623
Re: 1969 Radio receiver hood bonding strap
« Reply #11 on: October 22, 2012, 10:05:47 PM »
     In this location.   Brian
5RO9A GT  4 Spd Built 5/29/65
9TO2R SCJ 4 Spd Built 9/19/68
Owner Driver Mechanic
San Diego, Ca.

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9362
Re: 1969 Radio receiver hood bonding strap
« Reply #12 on: October 22, 2012, 10:53:08 PM »
They are correct for All 69-70 cars, Except Radio Delete. All Cars with Radio should have one. It mounts at the Far RH Front Edge of the Cowl Grille Panel.
What about Shelby's?
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline Andrew@MagMustangs

  • Sr. Member
  • ****
  • Posts: 335
  • MagMustangs: Original Parts for 64 1/2-73 Mustangs
    • MagMustangs
Re: 1969 Radio receiver hood bonding strap
« Reply #13 on: October 22, 2012, 11:57:21 PM »
What about Shelby's?
Is that a trick question Bob? Cuz I know you know, LOL. From what I am aware of, Yes, Even the Shelby with Fiberglass hood used them. Please let me know if I am wrong on that.

Also Brian, I typically find them mounted farther to the RH side than that, but that is not a definite. If you are recreating how it was mounted on your car before restoration then I would have to say that there could always be an exception, I'm just going off memory, I can't say for certain that every one I have removed was farther right.
MagMustangs: Vintage Mustang Enthusiasts. We have Original Factory Parts for 1964 1/2-1973 Ford Mustang.   Like Us On Facebook. https://www.facebook.com/MagMustangs

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7346
Re: 1969 Radio receiver hood bonding strap
« Reply #14 on: October 23, 2012, 12:22:42 AM »
Yes, Even the Shelby with Fiberglass hood used them.
The idea of the strap was to reduce static in the radio with an electrical connection from the body to the hood. If the strap went to some part of the fiberglass hood that was metal, sure - otherwise the strap would do nothing.
The lack of a strap with a radio delete answers the question of why my 1969 San Jose Sportsroof didn't have one. After three previous new Fords, the first factory installed radio I had was in a 1973 Torino. I was getting tired (and lazy) installing aftermarket types.
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.