« previous next »
Pages: [1]   Go Down

Author Topic: Disc brake 1969 spindle part number  (Read 2868 times)

Offline cool67

  • Jr. Member
  • **
  • Posts: 63
Disc brake 1969 spindle part number
« on: September 12, 2012, 10:58:21 PM »
Restoring a1969 mustang that is a roller at this point. I took off the RH front disc. brake spindle and am ready to detail it but the part number looks wrong  Here are the numbers on the spindle:
     
                        59
                 FoMoCo script
                      D5DW
                       3107
                         AA
 What do I have here? I want to make sure that the 1969 tie rods and ball joints work on this before ordering them. Is this a OEM 69 disc spindle?
Logged

Offline Andrew@MagMustangs

  • Sr. Member
  • ****
  • Posts: 335
  • MagMustangs: Original Parts for 64 1/2-73 Mustangs
    • MagMustangs
Re: Disc brake 1969 spindle part number
« Reply #1 on: September 12, 2012, 11:22:37 PM »
No, it is Not an OEM spindle for 1969. I'm not familiar with the Granada-Monarch-Versailles disc brake part numbers but it sounds like your car has had the GVM disc brake conversion.

The Factory Disc Brake Spindle will have a C8OA- part number.
Logged
MagMustangs: Vintage Mustang Enthusiasts. We have Original Factory Parts for 1964 1/2-1973 Ford Mustang.   Like Us On Facebook. https://www.facebook.com/MagMustangs

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9362
Re: Disc brake 1969 spindle part number
« Reply #2 on: September 12, 2012, 11:23:29 PM »
Quote from: cool67 on September 12, 2012, 10:58:21 PM
Restoring a1969 mustang that is a roller at this point. I took off the RH front disc. brake spindle and am ready to detail it but the part number looks wrong  Here are the numbers on the spindle:
     
                        59
                 FoMoCo script
                      D5DW
                       3107
                         AA
 What do I have here? I want to make sure that the 1969 tie rods and ball joints work on this before ordering them. Is this a OEM 69 disc spindle?
It is a wrong engineering number . You have a replacement part and not a OEM 69 spindle. You will have ether the C8 marked ones or DO marked ones depending on early or late.
Logged
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24626
Re: Disc brake 1969 spindle part number
« Reply #3 on: September 13, 2012, 09:53:35 PM »
Quote from: Bob Gaines on September 12, 2012, 11:23:29 PM
It is a wrong engineering number . You have a replacement part and not a OEM 69 spindle. You will have ether the C8 marked ones or DO marked ones depending on early or late.

A couple of pictures to illustrate - sorry the C8 one isn't the best - just what I had on hand)


C8 version (referred to as the small suspension)





KKX version (referred to as the large suspension- first version)





D0 version (referred to as the large suspension- second version)

Logged
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline specialed

  • Hero Member
  • *****
  • Posts: 1095
Re: Disc brake 1969 spindle part number
« Reply #4 on: September 17, 2012, 05:23:11 PM »
Jeff you & gaines are refering to 69-70 shelbys & 69 b2s what he asked was 69 mustang & they all got c8oa disc.brake spindles with no big suspension.
Logged
Pages: [1]   Go Up
« previous next »