Author Topic: 67 390 Engine ID tag  (Read 2059 times)

Offline 1965pony

  • Newbie
  • *
  • Posts: 16
67 390 Engine ID tag
« on: August 02, 2012, 02:51:05 PM »
Where should the metal engine ID tag be located on an S code 67 built at NJ in mid may?

Thanks,
Andrew

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24625
Re: 67 390 Engine ID tag
« Reply #1 on: August 02, 2012, 08:51:17 PM »
Believe the coil mounting bolt holds it to the engine assembly
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline 1965pony

  • Newbie
  • *
  • Posts: 16
Re: 67 390 Engine ID tag
« Reply #2 on: August 06, 2012, 09:30:51 AM »
Thanks

Offline BKnapp

  • Full Member
  • ***
  • Posts: 237
Re: 67 390 Engine ID tag
« Reply #3 on: June 11, 2019, 06:25:27 PM »
Since a thread was already started with an appropriate title, I thought I would continue with a couple of questions.

I found the tag on my engine attached to the coil bolt, as mentioned. It appears appropriate to my application, but can anyone please verify and possibly help with some of the codes...particularly the last character on each line.

The tag seems to reconcile with the casting date of the engine (7C6). My next question question is, would this casting date be too close to my cars actual build date of March 10, 1967?

Thanks!
Bill

‘67 390 Coupe A/T  P/S  P/B. (Built 1/4/1967)  7R01S145xxx
‘67 390 FB A/T P/S P/B (Built 3/10/1967) 7F02S173xxx
2007 Shelby GT500 40th Anniv.  Convert. #125

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7346
Re: 67 390 Engine ID tag
« Reply #4 on: June 11, 2019, 07:09:01 PM »
You can download your own Ford Car Parts (aka MPC) from here:
https://squarebirds.org/Manuals/1965/1965-72FordPartsTextCatalog/
It has what you asked about, plus more. The entire MPC is about 430mb and consists of 45 files.
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline preaction

  • Hero Member
  • *****
  • Posts: 1330
Re: 67 390 Engine ID tag
« Reply #5 on: June 11, 2019, 07:21:55 PM »
390CI   1967   change level 8   67-March   319A= automatic transmission   March 6 cast date  to March 10 car assembly date seems too close.
8F02R218047-  July 18 1968   Dearborn

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24625
Re: 67 390 Engine ID tag
« Reply #6 on: June 11, 2019, 07:38:59 PM »
I found the tag on my engine attached to the coil bolt, as mentioned. It appears appropriate to my application, but can anyone please verify and possibly help with some of the codes...particularly the last character on each line.

The tag seems to reconcile with the casting date of the engine (7C6). My next question question is, would this casting date be too close to my cars actual build date of March 10, 1967?

Just to clarify for all reading this is in reference to your ‘67 390 FB A/T P/S P/B (Built 3/10/1967) 7F02173xxx

Believe Preaction  decoded the aluminum tag correctly according to Ford documents and seems to fit the car mentioned above considering its a Dearborn build

As for the question about the date spread (engine casting to car completion date at Dearborn) does seem very tight. Would suggest you look for the assembly date as it will likely be later than the March 6th or could be even after March 10th.

More info the better


Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline BKnapp

  • Full Member
  • ***
  • Posts: 237
Re: 67 390 Engine ID tag
« Reply #7 on: June 13, 2019, 05:26:23 PM »
Where should I look for the assembly date stamping? I have yet to pull the engine, so it may be on the rear....but I haven't found anything on the little bit of cleaning I have done on the front of the engine.

Thanks again for your help!
Bill

‘67 390 Coupe A/T  P/S  P/B. (Built 1/4/1967)  7R01S145xxx
‘67 390 FB A/T P/S P/B (Built 3/10/1967) 7F02S173xxx
2007 Shelby GT500 40th Anniv.  Convert. #125

Offline preaction

  • Hero Member
  • *****
  • Posts: 1330
Re: 67 390 Engine ID tag
« Reply #8 on: June 13, 2019, 07:26:21 PM »
Bill, the engine assembly date is a hand stamped number on a small machined  pad on the drivers side front of the engine just below where the cylinder head mounts to the block.
8F02R218047-  July 18 1968   Dearborn