Author Topic: D code - Starter Cable bracket picture  (Read 12687 times)

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7346
Re: Starter Cable bracket picture
« Reply #15 on: February 25, 2012, 11:53:57 PM »
I actually need one of those too.  Someone was making those in their garage and getting $35 dollars a pop for them.  I can't remember if I saw them here or over on the Vintage Ford Mustang website.
According to the 64 Electrical Assembly Manual (which we know is a work of dubious authenticity), AM0003, pg23, the clamp is part of the battery ground cable assembly, C2OF-14301-B, and its part number is at best unknown, and if you go to page 24 of the same book, view B shows the clamp installation for the solenoid to starter cable. (Whew.)
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline Twilight65

  • Gold Level Subscriber
  • Sr. Member
  • *****
  • Posts: 380
Re: Starter Cable bracket picture
« Reply #16 on: February 26, 2012, 04:22:31 PM »
John, Here's a pic of my 65, I believe is correct.
Dave

65 Coupe Dearborn Scheduled Build July 9,1965 289/C4
66 Sprint Conv. Dearborn Scheduled Build May 13, 1966 200/C4

Offline bryancobb

  • Silver Level Subscriber
  • Hero Member
  • ****
  • Posts: 1077
  • 2009 Ridn' Around
Re: Starter Cable bracket picture
« Reply #17 on: February 26, 2012, 06:58:49 PM »
I've got my 66 just like yours, Dave, with two,  but... I THINK there's only suppose to be one.
66 Metuch Conv
Nightmist, Std Blu Int
6T08C223904    76A       K         22       15c     21      6        6
                      BODY  COLOR   TRIM    DATE   DSO   AXLE  XMSN
   C/O  785                                   (rotation #)
   16    C14   6T08C223904        (weld bay 16, bucked MAR 14)

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7346
Re: Starter Cable bracket picture
« Reply #18 on: February 26, 2012, 08:04:04 PM »
I think the determination for one bracket or two depends on the cable assembly part number. If it's a C5xxx, it requires two, if it's a C6xxx, it requires one. The transistion date is sometime in late 1965 or early 66 and probably is plant specific. My 66 "K", San Jose Oct 65 build, had the C5xxx cable with two brackets. The cable assembly was made in Canada and the brackets and insulator (and woven sleeve) were part of the assembly and Ford service apparently did not stock them separately.
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline bryancobb

  • Silver Level Subscriber
  • Hero Member
  • ****
  • Posts: 1077
  • 2009 Ridn' Around
Re: Starter Cable bracket picture
« Reply #19 on: February 26, 2012, 09:13:34 PM »
OK,  I stand updated!
66 Metuch Conv
Nightmist, Std Blu Int
6T08C223904    76A       K         22       15c     21      6        6
                      BODY  COLOR   TRIM    DATE   DSO   AXLE  XMSN
   C/O  785                                   (rotation #)
   16    C14   6T08C223904        (weld bay 16, bucked MAR 14)

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24620
Re: Starter Cable bracket picture
« Reply #20 on: February 26, 2012, 09:19:19 PM »
I think the determination for one bracket or two depends on the cable assembly part number. If it's a C5xxx, it requires two, if it's a C6xxx, it requires one. ..............


Here is an original example that does not match that pattern (5F07A270685)

Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline john_simms

  • Newbie
  • *
  • Posts: 49
Re: Starter Cable bracket picture
« Reply #21 on: February 26, 2012, 09:41:10 PM »
Thanks all for the information and pictures.

John

Offline mgmradio

  • Global Moderator
  • Sr. Member
  • ****
  • Posts: 310
Re: Starter Cable bracket picture
« Reply #22 on: February 26, 2012, 10:39:27 PM »
Jeff that is a picture from my Aug 64 A code.
  Mike
Formerly the MCA ANHJ 64.5-66!

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7346
Re: Starter Cable bracket picture
« Reply #23 on: February 26, 2012, 11:18:56 PM »

Here is an original example that does not match that pattern (5F07A270685)


That's a nice shiny bracket on what looks like blue painted 65, and - need I go on?
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7687
Re: Starter Cable bracket picture
« Reply #24 on: February 26, 2012, 11:55:56 PM »
That's a nice shiny bracket on what looks like blue painted 65, and - need I go on?
Jim

The engine is black, what are you seeing that is blue?  The car only has 4,500 original miles.
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7346
Re: Starter Cable bracket picture
« Reply #25 on: February 27, 2012, 12:51:08 AM »
What I see is the blue paint on a black engine.
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9358
Re: Starter Cable bracket picture
« Reply #26 on: February 27, 2012, 01:03:53 AM »
What I see is the blue paint on a black engine.
Jim
Jim,the color on my monitor must be off some because I can't distinquish blue paint anywhere . It all looks black. Some areas are shinier then others but still appears black. Would you mind explaning where you are seeing the blue paint?
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline bryancobb

  • Silver Level Subscriber
  • Hero Member
  • ****
  • Posts: 1077
  • 2009 Ridn' Around
Re: Starter Cable bracket picture
« Reply #27 on: February 27, 2012, 06:16:20 AM »

Here is an original example that does not match that pattern (5F07A270685)



OK MY MIND IS CHANGED.  There should only be one.
66 Metuch Conv
Nightmist, Std Blu Int
6T08C223904    76A       K         22       15c     21      6        6
                      BODY  COLOR   TRIM    DATE   DSO   AXLE  XMSN
   C/O  785                                   (rotation #)
   16    C14   6T08C223904        (weld bay 16, bucked MAR 14)

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7687
Re: Starter Cable bracket picture
« Reply #28 on: February 27, 2012, 10:28:23 AM »
What I see is the blue paint on a black engine.
Jim

I can assure you 100%, without a doubt, that there is no blue paint on this engine.  I've spent considerable time observing this car.  It's a great reference piece that illustrates a lot of assembly line transition components from generator to alternator production.

In regards to the "shiny" bracket, that is simply a consequence of the ultra low mileage of this car and I can also assure you that the bracket is original.
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline bryancobb

  • Silver Level Subscriber
  • Hero Member
  • ****
  • Posts: 1077
  • 2009 Ridn' Around
Re: Starter Cable bracket picture
« Reply #29 on: February 27, 2012, 10:47:39 AM »
My 66 is NOT original.  The clamps are repops.  There is two, and should only be one.
I can't remember if I replaced the cable with a repop or not, I think so.
BUT THE HEAT SHEATH IS WHITE WITH A BLACK STRIPE ON MINE AND IT IS ORIGINAL. 
66 Metuch Conv
Nightmist, Std Blu Int
6T08C223904    76A       K         22       15c     21      6        6
                      BODY  COLOR   TRIM    DATE   DSO   AXLE  XMSN
   C/O  785                                   (rotation #)
   16    C14   6T08C223904        (weld bay 16, bucked MAR 14)