Author Topic: Repro 67 390 GT Air Cleaner  (Read 7738 times)

Offline 390Pony

  • Newbie
  • *
  • Posts: 44
  • It's all Good
Repro 67 390 GT Air Cleaner
« on: February 01, 2012, 02:02:14 PM »
Good news ....Reading my March 2012 Issue of Popular Hot Rodding while in the reading room today, saw an article on "42 Hot speed Parts !" from the SEMA show has a nice picture of a 67 390 GT air cleaner that Scott Drake just released. Couldn't find it on their website so I called the number listed 800-999-0289. Gentleman I spoke to said 300 of them on order, coming soon, in their new catalog, not online, list  $394.95. He also said it's only the non-emissions version. That is pretty reasonable when compared to the swap meet prices I've seen on restored ones. Thought I'd pass it along :P

Offline Oz390

  • Hero Member
  • *****
  • Posts: 729
Re: Repro 67 390 GT Air Cleaner
« Reply #1 on: February 01, 2012, 07:35:58 PM »
Metal base or fiberglass?  Base and lid, or just base?
8R03S : 76A I 2A 15M 72 5 U
8R01S : 65A B 2A 28M 72 7 5 - Factory GT
8R01C : 65A M 2A 01E 72 2 W - Cal Special
8F01X : 65A I 2A 2G 20E 24 1 U - EXP500 repli-bute

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24620
Re: Repro 67 390 GT Air Cleaner
« Reply #2 on: February 01, 2012, 11:30:02 PM »
Had not seen them but would have guessed they would be making the 49 state version and the non - emission ones for the other states

Interesting that they felt they would sell even though there seems to be plenty of T bird bases for conversions out there

Thanks for sharing
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline krelboyne

  • Hero Member
  • *****
  • Posts: 1223
    • West Coast Classic Cougars
Re: Repro 67 390 GT Air Cleaner
« Reply #3 on: February 02, 2012, 02:00:52 AM »
I saw that at SEMA too.
We mentioned to Scott and Jerry, that some or most of the tooling is done for eventual 1969-70 G code and Q code air cleaners. Plus 1968-70 R code and 1969 S code air cleaner bases too.

We also suggested making the lids available separately.
Scott Behncke - Carcheaologist
West Coast Classic Cougars
503-463-1130
1968 GT/CS 302-4V San Jose 05B
1968 Cougar XR7 Dearborn 09A

Offline Oz390

  • Hero Member
  • *****
  • Posts: 729
Re: Repro 67 390 GT Air Cleaner
« Reply #4 on: February 02, 2012, 03:27:22 AM »
Which Tbird base is the same OD?   
8R03S : 76A I 2A 15M 72 5 U
8R01S : 65A B 2A 28M 72 7 5 - Factory GT
8R01C : 65A M 2A 01E 72 2 W - Cal Special
8F01X : 65A I 2A 2G 20E 24 1 U - EXP500 repli-bute

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24620
Re: Repro 67 390 GT Air Cleaner
« Reply #5 on: February 02, 2012, 05:05:05 AM »
Which Tbird base is the same OD?

The 67 -

This is the same one that was installed on some Calif delivered 390 Mustangs and the one some use to fake the 69 CJ air cleaners from

Its the thin (low profile) base as used on the Mustang rather than the taller Fairlane style
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline Brant

  • Sr. Member
  • ****
  • Posts: 497
    • Virginia Classic Mustang Inc
Re: Repro 67 390 GT Air Cleaner
« Reply #6 on: February 03, 2012, 12:22:32 AM »
The SEMA debut was a bit premature.  It will be 90-120 days until we see these.

Offline 390Pony

  • Newbie
  • *
  • Posts: 44
  • It's all Good
Re: Repro 67 390 GT Air Cleaner
« Reply #7 on: February 03, 2012, 01:34:01 PM »
The picture shows a complete set...Base and Chrome lid with no emissions tubing connections etc.

Offline Paperback Writer

  • Sr. Member
  • ****
  • Posts: 298
Re: Repro 67 390 GT Air Cleaner
« Reply #8 on: February 03, 2012, 02:33:14 PM »
This is great news!

Speaking of '67 390 Air Cleaners, I've seen at least six different styles on Mustangs over the years (and I'm not sure if all of them are correct for a Mustang).  I think I've got the first two nailed down (C7ZF-9600-E and C7ZF-9600-F), but can anyone here confirm the part numbers for the next four, and/or comment on their correctness on a '67 390 Mustang?

Thanks,
Kevin
1967 390 GTA Convertible
7R03S110###
76B - V - 6U - 30J - 72 - 1 - U
(Actually built on 9/22/1966 - Eight days ahead of schedule)

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24620
Re: Repro 67 390 GT Air Cleaner
« Reply #9 on: February 03, 2012, 10:52:59 PM »
For Calif deliverer cars I've seen your #6 on a number of cars (and two pretty original cars I've owned). Sometimes with the blue T bird sticker even (on the chrome lid)

Its pretty much the T Bird base with the chrome Mustang and Fairlane chrome lid

The whole subject has fueled a number of internet discussions in the past and unfortunately not much documentation as to what was original

 
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline 69SCJQ4.30

  • Jr. Member
  • **
  • Posts: 92
Re: Repro 67 390 GT Air Cleaner
« Reply #10 on: August 21, 2012, 02:16:26 PM »
This is great news!

Speaking of '67 390 Air Cleaners, I've seen at least six different styles on Mustangs over the years (and I'm not sure if all of them are correct for a Mustang).  I think I've got the first two nailed down (C7ZF-9600-E and C7ZF-9600-F), but can anyone here confirm the part numbers for the next four, and/or comment on their correctness on a '67 390 Mustang?

Thanks,
Kevin

I think there is a early version of the Mustang one that uses the lid that are on the Fairlane ones in this picture using the smaller element and in the picture Kevin posted in the PCV discussion. http://www.concoursmustang.com/forum/index.php?topic=5000.msg28227;topicseen#msg28227

Speaking of which, Kevin do you have an air cleaner?


Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24620
Re: Repro 67 390 GT Air Cleaner
« Reply #11 on: August 21, 2012, 04:12:28 PM »
I think there is a early version of the Mustang one that uses the lid that are on the Fairlane ones in this picture using the smaller element ..........


IMHO that looks like the Fairlane not the Mustang air cleaner base  but with that angle you would ahve to measure the height to be sure either way

Have seen allot of owners use them over the years since the Mustang one is more difficult to find.  Below are two examples of the open and closed version - C7ZZ-9600-F on bottom








« Last Edit: August 21, 2012, 04:17:21 PM by J_Speegle »
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline 69SCJQ4.30

  • Jr. Member
  • **
  • Posts: 92
Re: Repro 67 390 GT Air Cleaner
« Reply #12 on: August 21, 2012, 08:43:49 PM »
I measured it without a lid and it is 3.5 which with a lid I don't see getting to the 4.22 the book says. it has a date of 6H stamped in it, looks original but I'm sure it could have been added.

Offline Paperback Writer

  • Sr. Member
  • ****
  • Posts: 298
Re: Repro 67 390 GT Air Cleaner
« Reply #13 on: August 23, 2012, 10:43:32 AM »
Speaking of which, Kevin do you have an air cleaner?

The air cleaner that was on my car when I bought it in 1983 can be seen in picture number 4 of the attachment in my Feb. 3rd posting above (I believe the part number is C7OF-9600-B, but I'm not certain of it).  I'm not sure if it was original to the car, but I have seen them on a few other early '67 390 Mustangs as well, so who knows...

Did the one you have at your shop come off of an early '67 as well?
(Or is it mine?)

Best Regards,
Kevin
1967 390 GTA Convertible
7R03S110###
76B - V - 6U - 30J - 72 - 1 - U
(Actually built on 9/22/1966 - Eight days ahead of schedule)

Offline 69SCJQ4.30

  • Jr. Member
  • **
  • Posts: 92
Re: Repro 67 390 GT Air Cleaner
« Reply #14 on: August 23, 2012, 03:06:16 PM »
The air cleaner that was on my car when I bought it in 1983 can be seen in picture number 4 of the attachment in my Feb. 3rd posting above (I believe the part number is C7OF-9600-B, but I'm not certain of it).  I'm not sure if it was original to the car, but I have seen them on a few other early '67 390 Mustangs as well, so who knows...

Did the one you have at your shop come off of an early '67 as well?
(Or is it mine?)

Best Regards,
Kevin

Nope not yours, a guy dropped it off to figure out what it was he is going to sell it not sure how much yet, but it is dated correctly for your car! But if you measure yours if it is around 3.66" tall with the lid then it is most likely the original.