Author Topic: PDB master cylinder cover color  (Read 2417 times)

Offline Dave Stribling

  • Full Member
  • ***
  • Posts: 160
PDB master cylinder cover color
« on: January 23, 2012, 10:54:47 AM »
Doing a low mileage 69 Mach I with PDB, Feb 69 Dearborn car.  Original brake master cylinder is intact.  According to Dead Nuts On, the whole thing was painted semi-gloss black.  The original cap on this one is not paint with the master cylinder. Could it come both ways?





Dave

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9362
Re: PDB master cylinder cover color
« Reply #1 on: January 23, 2012, 07:25:01 PM »
Doing a low mileage 69 Mach I with PDB, Feb 69 Dearborn car.  Original brake master cylinder is intact.  According to Dead Nuts On, the whole thing was painted semi-gloss black.  The original cap on this one is not paint with the master cylinder. Could it come both ways?





Dave
In theory it could come both ways . Was it likly or typical? No. The service lids were unpainted silver. How do you know for sure that the lid had not been replaced at some point in the past? Bob
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24627
Re: PDB master cylinder cover color
« Reply #2 on: January 23, 2012, 11:02:46 PM »
Doing a low mileage 69 Mach I with PDB, Feb 69 Dearborn car.  Original brake master cylinder is intact.  According to Dead Nuts On, the whole thing was painted semi-gloss black. 

Semi-gloss black is what is currently the understanding. Interesting that the master cylinder is painted in your picture.

Here is a shot of an original Dearborn car built around the same time as your example





Here is a shot of a Dearborn car built after your example




Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline Dave Stribling

  • Full Member
  • ***
  • Posts: 160
Re: PDB master cylinder cover color
« Reply #3 on: January 24, 2012, 10:23:39 AM »
Well I talked to Jim last night and he assured me it was painted at some time,  the lacquer paint comes off very easy after the first wash.  I'll look it over real good for paint. - Dave

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24627
Re: PDB master cylinder cover color
« Reply #4 on: January 24, 2012, 08:47:32 PM »
Well I talked to Jim last night and he assured me it was painted at some time,  the lacquer paint comes off very easy after the first wash.  I'll look it over real good for paint. - Dave

The other observation is that some surfaces do not hold the paint as well as others. Plated (master cylinder covers) or smooth (timing covers) surfaces seem to be the worst at this. And of course type of paint plays into it also
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline TLea

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 1153
Re: PDB master cylinder cover color
« Reply #5 on: January 25, 2012, 08:46:44 AM »
Is there a shadow line at the top of the MC?
Tim Lea  Shelby concours judge MCA, SAAC, Mid America

Offline specialed

  • Hero Member
  • *****
  • Posts: 1095
Re: PDB master cylinder cover color
« Reply #6 on: January 25, 2012, 03:53:17 PM »
Dave any sign of paint on bail wire hold down and that white mark is a color code on side seen that before and have seen 3 70 m/c from low mile vehicles with no paint on lids but not 69s and have 3 nos m/c with black housings and cad plated caps.