Author Topic: Shifter knob?  (Read 2287 times)

Offline 69RavenConv

  • Full Member
  • ***
  • Posts: 101
  • Owner since '74
Shifter knob?
« on: January 17, 2012, 12:29:38 PM »
I believe the following is true for 1969 manual transmission equipped Mustangs:

  • 3-speed, std interior got a black (bakelite?) knob with the shift pattern embossed in white
  • 4-speed, std interior got a black (bakelite?) knob with the shift pattern embossed in white
  • 4-speed, deluxe interior got a woodgrain knob, with a white cap, blue stripes & pattern in black
  • Hurst shifters were not offered until 1970, and are aftermarket add-ons if found on a '69

My questions: was there a deluxe version of the 3-speed knob? I don't recall ever seeing one. Also, is there any other finish (white, chrome) that may have been offered and could be considered correct? Thanks again!
« Last Edit: January 17, 2012, 12:36:55 PM by 69RavenConv »
Phil
'69 Convertible - Dearborn June 4, 1969 - Raven Black & Red - 302-2V

Offline Andrew@MagMustangs

  • Sr. Member
  • ****
  • Posts: 335
  • MagMustangs: Original Parts for 64 1/2-73 Mustangs
    • MagMustangs
Re: Shifter knob?
« Reply #1 on: January 17, 2012, 01:55:51 PM »
I believe the Deluxe Interior with 3 Speed did have a unique knob. Here is a photo
MagMustangs: Vintage Mustang Enthusiasts. We have Original Factory Parts for 1964 1/2-1973 Ford Mustang.   Like Us On Facebook. https://www.facebook.com/MagMustangs

Offline 69RavenConv

  • Full Member
  • ***
  • Posts: 101
  • Owner since '74
Re: Shifter knob?
« Reply #2 on: January 17, 2012, 07:46:25 PM »
I suspected it existed, now I know. Thanks!
Phil
'69 Convertible - Dearborn June 4, 1969 - Raven Black & Red - 302-2V

Offline Andrew@MagMustangs

  • Sr. Member
  • ****
  • Posts: 335
  • MagMustangs: Original Parts for 64 1/2-73 Mustangs
    • MagMustangs
Re: Shifter knob?
« Reply #3 on: January 17, 2012, 09:09:08 PM »
This is the only one I have seen. Probably pretty rare considering the amount of 69s that would have Decor Interior and 3 Speed Manual.

1968 would use the same type of knob, but like the 4 Speed Knob, the shape of the Top of the Numeral 3 is different between years. The 68 has a Flat top on the 3 and 69 has a Round Top on the 3. AFAIK
MagMustangs: Vintage Mustang Enthusiasts. We have Original Factory Parts for 1964 1/2-1973 Ford Mustang.   Like Us On Facebook. https://www.facebook.com/MagMustangs

Offline 69RavenConv

  • Full Member
  • ***
  • Posts: 101
  • Owner since '74
Re: Shifter knob?
« Reply #4 on: January 17, 2012, 11:32:27 PM »
In a discussion on another forum, a couple of posters mentioned base model Mach I's they had owned with the 3-speed transmission. I assumed the Mach I would not get the bakelite knob. I agree that few probably survived, and many of those that did were probably upgraded with another transmission.
« Last Edit: January 17, 2012, 11:35:09 PM by 69RavenConv »
Phil
'69 Convertible - Dearborn June 4, 1969 - Raven Black & Red - 302-2V

Offline specialed

  • Hero Member
  • *****
  • Posts: 1095
Re: Shifter knob?
« Reply #5 on: January 29, 2012, 11:57:04 PM »
Also 69 3-speed knob had smaller threaded hole as the chrome handle was 3-speed unique.

Offline rharlan

  • Newbie
  • *
  • Posts: 13
Re: Shifter knob?
« Reply #6 on: February 22, 2012, 05:35:08 PM »
In 69 the base Mach 1 came with a 351-2V & 3spd manual transmission. These cars had the woodgrain knob with white face. Most Mach 1s were ordered with the other engine options and 4spds. According to marti there were 5,693 Sportsroof mustangs built with the H code and 3spd. Probably less than half of those had the deluxe interior. Sportsroof production was 63A-56,022, 63B-5,958 and 63C-72,458 for a total of 134,438. So only 4% had the H code and 3spd.
Bob
Original owner 69 Mach 1 H code 3spd

Offline specialed

  • Hero Member
  • *****
  • Posts: 1095
Re: Shifter knob?
« Reply #7 on: February 23, 2012, 08:12:27 PM »
i think i have an nos 3-speed wood knob if anbody needs it