Author Topic: What constiutes early or late in a production year  (Read 4645 times)

Offline RocketScientist

  • Sr. Member
  • ****
  • Posts: 302
What constiutes early or late in a production year
« on: January 09, 2012, 03:14:56 AM »
In terms of the normal yearly Mustang production cycle what in what months would a car be considered an early build and what months be regarded a late build?
Was it that simple?
Thanks,
Brad.

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7687
Re: What constiutes early or late in a production year
« Reply #1 on: January 09, 2012, 11:06:25 AM »
First few months are early, last few months are late.  Just a general term since a lot of changes could span early, middle or late during one model year.
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24628
Re: What constiutes early or late in a production year
« Reply #2 on: January 09, 2012, 08:15:16 PM »
First few months are early, last few months are late.  Just a general term since a lot of changes could span early, middle or late during one model year.

+1

Might describe it as the first three and the last three
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline midlife

  • Wiring Guru---let me check your shorts!
  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2175
    • Midlife Harness Restorations
Re: What constiutes early or late in a production year
« Reply #3 on: January 09, 2012, 10:19:12 PM »
In 1966, early and late are sometimes decided by March 16, when there was a change-over in wiring harnesses and the emergency switch connectors.
In 1965, early and late are sometimes differentiated by how the heater boxes/resistor packs were set up; I believe the change-over was about the time that the GT's were introduced (March sales but February builds).
Midlife Harness Restorations - http://midlifeharness.com

Offline cobraboy

  • Full Member
  • ***
  • Posts: 182
Re: What constiutes early or late in a production year
« Reply #4 on: January 10, 2012, 06:03:17 PM »
In 1966, early and late are sometimes decided by March 16, when there was a change-over in wiring harnesses and the emergency switch connectors.
In 1965, early and late are sometimes differentiated by how the heater boxes/resistor packs were set up; I believe the change-over was about the time that the GT's were introduced (March sales but February builds).

Interesting, so my April GT with a resistor in the heater box is a late car ?
13th April 1965 Dearborn K GT on the other side of the pond.

Offline midlife

  • Wiring Guru---let me check your shorts!
  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2175
    • Midlife Harness Restorations
Re: What constiutes early or late in a production year
« Reply #5 on: January 10, 2012, 09:31:30 PM »
Interesting, so my April GT with a resistor in the heater box is a late car ?

From an electrical point of view, yes.
Midlife Harness Restorations - http://midlifeharness.com

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7687
Re: What constiutes early or late in a production year
« Reply #6 on: January 10, 2012, 11:59:42 PM »
Gets even more crazy around that time period as even Ford documentation makes reference of "1965 1/2" models...
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline cobraboy

  • Full Member
  • ***
  • Posts: 182
Re: What constiutes early or late in a production year
« Reply #7 on: January 12, 2012, 05:45:24 PM »
From an electrical point of view, yes.

Thank you
Mark
13th April 1965 Dearborn K GT on the other side of the pond.

Offline lscman

  • Full Member
  • ***
  • Posts: 150
Re: What constiutes early or late in a production year
« Reply #8 on: January 24, 2012, 07:44:34 PM »
I'm not really sure what makes a half year 65 but I've had 5 of them and everyone of those I had didn't have any chrome on the side of the quarter panel.There might have been some other small differences but that was the one that stands out the most for me.

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7687
Re: What constiutes early or late in a production year
« Reply #9 on: January 24, 2012, 08:49:29 PM »
Most of the "1965 1/2" models reference I have seen in Ford docs was related to the deluxe interior and GT equipment option.

As far as the quarter emblem being missing, that's just a regular production option, called the Accent Group.  Included deletion of quarter ornament on coupes and convertibles, rocker panel moldings installed (coupes/convertibles) and a thin painted accent stripe along the body lines.
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline midlife

  • Wiring Guru---let me check your shorts!
  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2175
    • Midlife Harness Restorations
Re: What constiutes early or late in a production year
« Reply #10 on: January 24, 2012, 09:36:30 PM »
Quarter emblem is also deleted for all GT's.
Midlife Harness Restorations - http://midlifeharness.com

Offline hughnews1

  • Full Member
  • ***
  • Posts: 173
Re: What constiutes early or late in a production year
« Reply #11 on: May 06, 2012, 06:15:46 PM »
I just sold a coupe here in FL  birthday was  aug 14 1967  late huh
hugh  schnacky

Offline bryancobb

  • Silver Level Subscriber
  • Hero Member
  • ****
  • Posts: 1077
  • 2009 Ridn' Around
Re: What constiutes early or late in a production year
« Reply #12 on: May 07, 2012, 07:43:40 AM »
In 1966, early and late are sometimes decided by March 16, when there was a change-over in wiring harnesses and the emergency switch connectors.
In 1965, early and late are sometimes differentiated by how the heater boxes/resistor packs were set up; I believe the change-over was about the time that the GT's were introduced (March sales but February builds).

So on my signature car, the SCHED build date was MAR 15.  I Thinkk it was actually built on the 17th??  What do I need to now about wiring?
66 Metuch Conv
Nightmist, Std Blu Int
6T08C223904    76A       K         22       15c     21      6        6
                      BODY  COLOR   TRIM    DATE   DSO   AXLE  XMSN
   C/O  785                                   (rotation #)
   16    C14   6T08C223904        (weld bay 16, bucked MAR 14)

Offline Jays66gt

  • Jr. Member
  • **
  • Posts: 74
Re: What constiutes early or late in a production year
« Reply #13 on: May 07, 2012, 07:33:45 PM »
So when did production start for each model year 1964 to 1966?
1966 GT
6R07A105XXX
San Jose car delivered to Denver in September 1965.

Offline midlife

  • Wiring Guru---let me check your shorts!
  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2175
    • Midlife Harness Restorations
Re: What constiutes early or late in a production year
« Reply #14 on: May 07, 2012, 10:13:43 PM »
So on my signature car, the SCHED build date was MAR 15.  I Thinkk it was actually built on the 17th??  What do I need to now about wiring?

You could probably go with either system.  I would imagine that there was a short period for transitioning the wiring.
Midlife Harness Restorations - http://midlifeharness.com