Topic: 1966 289 belt Part number

[AU SNK]

Does anyone have the 289 part number?

This is for a non pwr steering and ac 289. I have potentially located a NOS belt and want to make sure it has the right part number.


Thanks

[J_Speegle]

I'm guessing this is with out Thermactor also

From a Dec 67 catalog (not sure if it has been replaced/updated by that date)

C4TE-8620-S part number- this may not be (normally is not) the same as the engineering number

Length - 40 1/2
Width at top - 15/32

[Twilight65]

Jeff,
 Just for my own curiosity I was trying to look this up.  Would the belt also have like a EB404 or JB404 on it. I was reading in the MPC(1975) that J=V belt, B= 15/32, 404 = 40 1/2. Was just wandering as my belt on my 289 (no ac/te/or ps) has both numbers.
Thanks,
Dave

[J_Speegle]

Jeff,
 Just for my own curiosity I was trying to look this up.  Would the belt also have like a EB404 or JB404 on it. I was reading in the MPC(1975) that J=V belt, B= 15/32, 404 = 40 1/2. Was just wandering as my belt on my 289 (no ac/te/or ps) has both numbers.

Would have to look to see if I have dated ones from that period to see. The quick numbering system came into play at some point but right this moment can't remember when the change was

[jwc66k]

Factory (per 66 Engine Assy Manual, AM0156 pg36) - C4TE-8620-AC, 40.25 X 15/16.
Service (per Ford Car Parts, sec 86.1 pgs 6, 20 & 21) -C9PZ-8620-S, 41 1/4 X 15/32, JB-412.
I think the JB-412 belts were marked with the factory number (C4TE-8620-AC) and are the current selling item. My 65 does have a belt marked C4TE-8620-S but I put that one on at least 15 years ago. Factory is same as 66 (AM155 pg12).
Jim

[AU SNK]

Thanks for the info. Big help