Author Topic: 65 SJ Drive Shaft Markings  (Read 6950 times)

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24628
Re: 65 SJ Drive Shaft Markings
« Reply #15 on: May 19, 2015, 09:52:05 PM »
These are off my wive's 65 vert built Sept 64 in SJ. Has anyone seen the "4N" before?

Believe that represents when the tub (used for making three drivelines) was made. Have maybe six different 64 tube dates but no an N yet - until now. Letter may identify the date (part of the date) or supplier


The stripes are white (closest to end) and purple/lilac.
Is this correct for a C code with C4 and 2.8 gears?
Is there a reference chart anywhere?

No charts available that I know of and the buildsheets don't help in identifying which when where

Is the "purple/lilac" forward of the white stripe?

Do have other examples (C code auto) through 65 with a purple and white and later ones with pink and white.

The term Lavender was typically the name used for the purple or lilac color
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline 66RavenGTCoupe

  • Full Member
  • ***
  • Posts: 230
Re: 65 SJ Drive Shaft Markings
« Reply #16 on: May 19, 2015, 10:37:53 PM »
So ours is the first "N" officially on record! Our little part of Mustang history! Hehehe.
Yes, Jeff, the Lavender is forward of the white stripe.
Thanks once again for your response.
66 Metuchen, NJ  GT Coupe
Raven, Deluxe Black Int
6T07A1612##
BODY  COLOR   TRIM    DATE   DSO   AXLE  TRANS
    65B     A      66           02M     22          1     6
Buck Tag:
C/O  362  (Customer Order, Rotation Number)
5    M7 (Weld Bay 5, Bucked Dec 7)
PIO (Performance Image Option - GT)

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24628
Re: 65 SJ Drive Shaft Markings
« Reply #17 on: May 19, 2015, 10:44:11 PM »
Yes, Jeff, the Lavender is forward of the white stripe.

That would match the "order" of application on the other examples I've collected and others have shared
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline rocket289k

  • Sr. Member
  • ****
  • Posts: 381
Re: 65 SJ Drive Shaft Markings
« Reply #18 on: May 27, 2015, 05:39:45 PM »
Coincidentally the serial number on the driveshaft of my Metuchen plant late July scheduled build '65 matches Jim's (except for the final letter).  My driveshaft stencil is 19078-4N.  It is an "A" code, automatic factory GT car.  I also have the lavender and green stripes on the driveshaft.  I've posted the before and after restoration pictures.

Regards,

Ron

1965 "A" Code 289 Mustang GT - Planned Build Date July 19 / Bucked July 21 Metuchen / Factory AC & PS / C4 Auto / 3.00 open

Offline carlite65

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2411
Re: 65 SJ Drive Shaft Markings
« Reply #19 on: May 27, 2015, 06:03:53 PM »
i could be mistaken here but i believe in you 2nd pic the stripe should cover the stenciled number. that number was put on at the tube manufacturer and the stripes added later after determining the shaft application.
5F09C331248

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7346
Re: 65 SJ Drive Shaft Markings
« Reply #20 on: May 27, 2015, 06:39:48 PM »
i could be mistaken here but i believe in you 2nd pic the stripe should cover the stenciled number.
The strips were put on "sloppy" with a well used brush by a union worker who was not building a concourse grade car. Ignore the "stenciled" number too.
Jim

I promise to be politically correct in all my posts to keep the BBBB from vociferating.