Topic: 65 Fastback Trunk Measurement

[Armond]

I need a measurement, note picture, from the back of the trunk divider to the center of the hole on a fastback.  I am putting a 65 back together that had been cut up for racing etc. I just want to make sure this is correct before I start to weld it back together, any help appreciated, thank you!

[Bossbill]

 I have 19 1/4 to the edge on both sides of my 65 street car. 19 5/8 to center (approx).

[Armond]

Thank you so much Bill

[Bossbill]

You bet.
Oh, I should note I was using a tape with an L on the end. Be sure to use a similar contractor tape measure.

[Armond]

Thank you!