Hello All,
I am in the process of routing the main dash harness wiring down to the connections on the driver?s side kick panel. When I disassembled and removed the dash, the bulk of wires were routed between the steel pillar/sound deader and the plastic trim panel. I was wondering if this is the correct route or if some of the wiring from the dash goes inside the steel pillar top hole and out the bottom. Meaning some of the wiring would route inside the pillar. If the latter is the correct route, I don?t see how all of those plugs fit inside the steel pillar.
If anyone has a picture of their drivers side kick panel removed for reference that would be great. I have added a few pics/diagrams for reference.
Appreciate any help
Jeff
