Join us on Facebook: Search for 'ConcoursMustang' Private group!https://www.facebook.com/groups/concoursmustang/SAAC-50 , Sonoma, CA August 21-24, 2025http://www.saac.com/
Trying to determine what I should be using for the Waterpump Bypass Hose. See this from Dead Nuts On
The picture is of the metal tube that is pressed into the pump and into the intake. Ford used a special reinforced rubber hose to go between the metal nipple in the intake and the one coming out of the water pump. most people use a piece of heater hose but it is thicker wall and has a tendency to balloon out . I would check with jacks as I think he was selling a short reinforced hose alternative.
I have tried searching to find a photo of an original, but no luck so far
https://www.ebay.com/itm/304651887245?epid=1511214444&hash=item46eeaae28d:g:oOgAAOSwxuBjPdBI&amdata=enc%3AAQAIAAAAwJ6ch2KCAMdu66bHGYSEwrngYja4l1qzY6KbwxZiKN3tFUrZ8yN8wDNAkSb9Z9RD7rU5xMoZgnLMC4dHmyoTZo6pk8F9rl465G5a5oaGO9mC6tB%2FZKHDjaErwuan2%2B%2FVkH3SW%2B01yL5YeAX%2FqzilYSQHm8IIZBmZJNt62cqzDwLLdpunPj2LUg8rgsr5PQWi6SDKZtOsr5wLnoA%2FXNzDDHpWZnD43Nqy7uSyXUTaS4qfkhGIu%2FkY8c4sPISjPc0Zlg%3D%3D%7Ctkp%3ABk9SR8jSqPfuYg
part number C2OZ-8597-Dyou might found some on eBay.Laurent