« previous next »
Pages: [1]   Go Down

Author Topic: Manual Shifter Rebuild - 1968 Mustang 390 and others  (Read 1523 times)

Offline bullitt68

  • Hero Member
  • *****
  • Posts: 2206
Manual Shifter Rebuild - 1968 Mustang 390 and others
« on: July 31, 2023, 03:26:07 AM »
Just rebuilding my shifter and I am wondering which of these pins gets removed or both to take the shifter housing apart. I did a search on youtube and all the rebuild videos did not take the shifter shaft apart.


Thanks


« Last Edit: July 31, 2023, 10:58:23 PM by J_Speegle »
Logged
Mike
1968 Mustang Fastback GT 390 Raven Black, 4 speed
8R02S162374, San Jose, June 5, 1968

Offline preaction

  • Hero Member
  • *****
  • Posts: 1330
Re: Manual Shifter Rebuild 1968 Mustang 390
« Reply #1 on: July 31, 2023, 11:11:01 AM »
Remove the round pin and the U shaped bracket will come off and the shaft will slide off.
Logged
8F02R218047-  July 18 1968   Dearborn

Offline bullitt68

  • Hero Member
  • *****
  • Posts: 2206
Re: Manual Shifter Rebuild 1968 Mustang 390
« Reply #2 on: July 31, 2023, 11:58:27 AM »
Quote from: preaction on July 31, 2023, 11:11:01 AM
Remove the round pin and the U shaped bracket will come off and the shaft will slide off.

The pin is really stuck in there. I tried to bang it out but it does not move. Also tried a press. Also for some reason I am not able top open the attachment
« Last Edit: July 31, 2023, 02:39:52 PM by bullitt68 »
Logged
Mike
1968 Mustang Fastback GT 390 Raven Black, 4 speed
8R02S162374, San Jose, June 5, 1968

Offline Bossbill

  • Hero Member
  • *****
  • Posts: 3283
  • In the middle of project hell
Re: Manual Shifter Rebuild 1968 Mustang 390
« Reply #3 on: July 31, 2023, 02:39:21 PM »
The round pin on these appears to have grown onto the shaft on the few of these I've done.
We are talking building thick plate metal supports on either side of the aluminum saddle and hitting the pin with a drift and a 2 1/2 pound hammer tight.
Logged
Bill
Concours  Actual Ford Build 3/2/67 GT350 01375
Driven      6/6/70 0T02G160xxx Boss 302
Modified   5/18/65 5F09A728xxx Boss 347 Terminator-X 8-Stack
Race        65 2+2 Coupe conversion

Offline bullitt68

  • Hero Member
  • *****
  • Posts: 2206
Re: Manual Shifter Rebuild 1968 Mustang 390
« Reply #4 on: July 31, 2023, 02:40:56 PM »
Quote from: Bossbill on July 31, 2023, 02:39:21 PM
The round pin on these appears to have grown onto the shaft on the few of these I've done.
We are talking building thick plate metal supports on either side of the aluminum saddle and hitting the pin with a drift and a 2 1/2 pound hammer tight.

I am working on it. does not really appear to be built with servicing in mind!
Logged
Mike
1968 Mustang Fastback GT 390 Raven Black, 4 speed
8R02S162374, San Jose, June 5, 1968

Offline Bossbill

  • Hero Member
  • *****
  • Posts: 3283
  • In the middle of project hell
Re: Manual Shifter Rebuild 1968 Mustang 390
« Reply #5 on: July 31, 2023, 03:07:48 PM »
No, you went to the dealer and bought another one.
Logged
Bill
Concours  Actual Ford Build 3/2/67 GT350 01375
Driven      6/6/70 0T02G160xxx Boss 302
Modified   5/18/65 5F09A728xxx Boss 347 Terminator-X 8-Stack
Race        65 2+2 Coupe conversion

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7688
Re: Manual Shifter Rebuild 1968 Mustang 390
« Reply #6 on: July 31, 2023, 03:40:40 PM »
The whole thing can be plated together.  The steel spacer on the end can be removed.
Logged
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline bullitt68

  • Hero Member
  • *****
  • Posts: 2206
Re: Manual Shifter Rebuild 1968 Mustang 390
« Reply #7 on: July 31, 2023, 04:09:39 PM »
Quote from: Bossbill on July 31, 2023, 03:07:48 PM
No, you went to the dealer and bought another one.

Good point. Why didn't I think of that!
Logged
Mike
1968 Mustang Fastback GT 390 Raven Black, 4 speed
8R02S162374, San Jose, June 5, 1968

Offline bullitt68

  • Hero Member
  • *****
  • Posts: 2206
Re: Manual Shifter Rebuild 1968 Mustang 390
« Reply #8 on: July 31, 2023, 04:10:16 PM »
Quote from: CharlesTurner on July 31, 2023, 03:40:40 PM
The whole thing can be plated together.  The steel spacer on the end can be removed.

I was discussing that with Bill. Perhaps that is the best way to go about it
Logged
Mike
1968 Mustang Fastback GT 390 Raven Black, 4 speed
8R02S162374, San Jose, June 5, 1968

Offline bullitt68

  • Hero Member
  • *****
  • Posts: 2206
Re: Manual Shifter Rebuild 1968 Mustang 390
« Reply #9 on: July 31, 2023, 04:16:00 PM »
Quote from: CharlesTurner on July 31, 2023, 03:40:40 PM
The whole thing can be plated together.  The steel spacer on the end can be removed.

Interestingly the only rebuild kits I could find are for the handle where it mounts to the shifter. Not like a Hurst! All the shims/spacers etc



Logged
Mike
1968 Mustang Fastback GT 390 Raven Black, 4 speed
8R02S162374, San Jose, June 5, 1968

Offline bullitt68

  • Hero Member
  • *****
  • Posts: 2206
Re: Manual Shifter Rebuild 1968 Mustang 390
« Reply #10 on: July 31, 2023, 08:39:40 PM »
Quote from: CharlesTurner on July 31, 2023, 03:40:40 PM
The whole thing can be plated together.  The steel spacer on the end can be removed.

After discussing with Boss Bill I opted to zinc plate the shifter housing assembled instead of messing with the pin any longer. The pin won!
Logged
Mike
1968 Mustang Fastback GT 390 Raven Black, 4 speed
8R02S162374, San Jose, June 5, 1968
Pages: [1]   Go Up
« previous next »