Topic: 68 Cluster Wiring?

[Bobsdad]

Hi everyone, can anyone tell me what guage wiring is used behind the instrument cluster and are there any places you recommend buying wiring? Thanks.

[J_Speegle]

First welcome to the site. Hope you find the information and support here helpful in returning or maintaining your car as it was originally built.

We have a section that focuses specifically on "Providers and Services"  Using the search I found the usual two answers to for purchasing or having your originals repaired. Be aware that not all of the reproductions are 100% like originals so take that into consideration.

For great information, knowledge and repair
https://www.concoursmustang.com/forum/index.php?topic=3.0

For new reproduction wiring you will find dozens of threads suggesting Alloy Metal Products. Such as this one
https://www.concoursmustang.com/forum/index.php?topic=3646.msg27834#msg27834

Direct contact or the wiring is resold through a number of the Mustang shops (as to make sure they are the provider) or member Coralsnake can often provide also
https://www.concoursmustang.com/forum/index.php?topic=13668.msg84531#msg84531

[midlife]

wire size is typically 16 or 18 gauge.  If you want concours-correct wiring, Rhode Island Wiring sells wiring by the foot.

[jwc66k]

Rhode Island Wiring sells wiring by the foot.

Rhode Island Wiring http://www.riwire.com/ sell a lot (it is two words) of other wiring repair items like the brass "button" that goes on the end of a wire inside a lamp socket, and replacement springs (think license plate lights).
Be advised that they don't use stock numbers to order items but use descriptions.
Jim

[KDunne]

First welcome to the site. Hope you find the information and support here helpful in returning or maintaining your car as it was originally built.

We have a section that focuses specifically on "Providers and Services"  Using the search I found the usual two answers to for purchasing or having your originals repaired. Be aware that not all of the reproductions are 100% like originals so take that into consideration.

For great information, knowledge and repair
https://www.concoursmustang.com/forum/index.php?topic=3.0

For new reproduction wiring you will find dozens of threads suggesting Alloy Metal Products. Such as this one
https://www.concoursmustang.com/forum/index.php?topic=3646.msg27834#msg27834


Direct contact or the wiring is resold through a number of the Mustang shops (as to make sure they are the provider) or member Coralsnake can often provide also
https://www.concoursmustang.com/forum/index.php?topic=13668.msg84531#msg84531

I recommend Coralsnake...(Peter Disher)

[Coralsnake]

There are two instrument cluster wiring harnesses. One is with Tach and one without. They are reproduced and they are fairly accurate. The cost is around $150. Thats probably going to be your best route

Feel free to contact me if you need one

Coralsnake68@hotmail.com

[Bobsdad]

Thank you all for the warm welcome and helpful information. Glad to be here.

[Kascus]

Original style repo wiring harness (with tach).