« previous next »
Pages: 1 2 [3] 4 5 6   Go Down

Author Topic: 65 Assmebly Line V8 Oil Filters  (Read 23774 times)

Offline YELLOWBOSS2

  • Jr. Member
  • **
  • Posts: 72
Re: 65 Oil Filter Stamp
« Reply #30 on: November 11, 2011, 08:30:32 PM »
I have a late May 65 HiPO San Jose car. Can anyone help me with what numbers would be on the bottom of the stamp and the numer at the top?
Thanks for the great help.
Dave
Logged

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24627
Re: 65 Oil Filter Stamp
« Reply #31 on: November 11, 2011, 10:39:29 PM »
Quote from: YELLOWBOSS2 on November 11, 2011, 08:30:32 PM
I have a late May 65 HiPO San Jose car. Can anyone help me with what numbers would be on the bottom of the stamp and the number at the top?

Dave I don't believe there is a consensus of how the numbering (date?) worked at this time.
Logged
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline C5ZZKGT

  • Gold Level Subscriber
  • Hero Member
  • *****
  • Posts: 787
Re: 65 Oil Filter Stamp
« Reply #32 on: November 12, 2011, 08:03:55 AM »
Is there any other part on the car that might have a simmiliar number sequence that we can possibly relate to this oil filter number, I have a guy asking me locally about mine and I'm not 100% certain and don't want to steer him wrong.
Logged

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9362
Re: 65 Oil Filter Stamp
« Reply #33 on: November 12, 2011, 12:06:21 PM »
Quote from: J_Speegle on November 11, 2011, 10:39:29 PM
Dave I don't believe there is a consensus of how the numbering (date?) worked at this time.
+1. Bob
Logged
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline bryancobb

  • Silver Level Subscriber
  • Hero Member
  • ****
  • Posts: 1077
  • 2009 Ridn' Around
Re: 65 Oil Filter Stamp
« Reply #34 on: November 12, 2011, 02:53:38 PM »
Quote from: Twilight65 on February 28, 2011, 05:16:04 PM
... I can tell you that stamping ain't always easy...

I was getting frustrated and then I FOUND THE TRICK!

Do NOT spray some flat surface that you then use as a stamp-pad.

DO spray a couple of light coats DIRECTLY onto the face of the stamp and then do the stamping.  Works perfect 100% of the time.
    * The paint gets a little tacky before you can get it stamped and that keeps it from sliding around.
    * The amount of paint on the stamp is very uniform this way.
Logged
66 Metuch Conv
Nightmist, Std Blu Int
6T08C223904    76A       K         22       15c     21      6        6
                      BODY  COLOR   TRIM    DATE   DSO   AXLE  XMSN
   C/O  785                                   (rotation #)
   16    C14   6T08C223904        (weld bay 16, bucked MAR 14)

Offline C5ZZKGT

  • Gold Level Subscriber
  • Hero Member
  • *****
  • Posts: 787
Re: 65 Oil Filter Stamp
« Reply #35 on: November 12, 2011, 03:39:58 PM »
Quote from: YELLOWBOSS2 on November 11, 2011, 08:30:32 PM
I have a late May 65 HiPO San Jose car. Can anyone help me with what numbers would be on the bottom of the stamp and the numer at the top?
Thanks for the great help.
Dave

Dave, I had forgotten your user name on here. It was good meeting you last Sunday at Palm Bay Ford!
My stamp has the numbers "2658" on it so if you'd like to use it in the intrum you are more than welcome to it.
I think we might have a stumper on our hands for now.....
Was that NICE Yellow '70 Boss 302 at the show yours?   -Rick
Logged

Offline YELLOWBOSS2

  • Jr. Member
  • **
  • Posts: 72
Re: 65 Oil Filter Stamp
« Reply #36 on: November 12, 2011, 03:49:48 PM »
Rick,
It was great meeting you.
I sold my Boss 302 a while ago but mine was a twin to that one.
I will contact you by email about using your stamp. 
Thanks for the offer.

Dave
« Last Edit: November 12, 2011, 03:51:39 PM by YELLOWBOSS2 »
Logged

Offline NEFaurora

  • Hero Member
  • *****
  • Posts: 970
Re: 65 Oil Filter Stamp
« Reply #37 on: November 13, 2011, 11:12:05 PM »

Keep up the nice work Dave - Nice to see someone actually taking a stab at making this stamp.

Tony K.
Logged
Tony Kovar (NEFaurora@aol.com)
1965 Mustang Convertible 200 cid 3spd manual
1966 Mustang Convertible Sprint 200 C4 Auto
2007 Mustang Convertible V6 Auto with "Pony Package".
1966 Mustang Sprint 200 Registry Owner/Moderator
MCA#70001

Offline C5ZZKGT

  • Gold Level Subscriber
  • Hero Member
  • *****
  • Posts: 787
Re: 65 Oil Filter Stamp
« Reply #38 on: November 16, 2011, 10:31:01 AM »
I HAVE a stamp sitting here on my desk. pretty accurate fonts, has "2658" on the bottom of it, if anyone would like to borrow it I'll send it their way-I'd like to borrow a date stamp that can do dates for 1965.....
Logged

Offline kiehlr

  • Newbie
  • *
  • Posts: 6
  • Bob Kiehl, retired Ford assembly engineer
Re: 65 Oil Filter Stamp
« Reply #39 on: November 19, 2011, 03:00:25 PM »
I though the oil filters were installed at the engine plant and painted with the engine.  Therefor, the oil filter should be black for 65 and blue for 66 up with no ink stampings for a from the factory look.
Logged
I worked at the Metuchen Assembly Plant from 1965 to 1970.The picture of me in my Mustang was taken May 1965 in front of the Metuchen Plant.  It was a Dearnborn car since Metuchen did not produce convertibles in 1965. My daily driver looks the same but is not. Current project 66 GT convertible.

Offline autonomousbronco

  • Newbie
  • *
  • Posts: 27
Re: 65 Oil Filter Stamp
« Reply #40 on: November 19, 2011, 03:16:21 PM »
@ kiehlr, I don't know how to post an image but I have a picture of an original oil filter that's painted black on the block and then ink stamped. I can post it if someone tells me how or email to you. Also, if you have a Mustang Monthly from February 1988, on pg 18 the first image on the top left shows a filter that was painted on the block and then stamped; again I don't mind scanning and then posting the image or emailing it to you.
Logged
"When loading the trailer: Keep shiny side up and rubber side down."

Offline C5ZZKGT

  • Gold Level Subscriber
  • Hero Member
  • *****
  • Posts: 787
Re: 65 Oil Filter Stamp
« Reply #41 on: November 21, 2011, 06:29:32 AM »
I often wondered about the actual installation of the stamp myself.
I would have thought that provided the filter was installed BEFORE the engine was painted (1) what color the filter was to begin with? and how/who added the stamp since it looks almost impossible to stamp the filter with it installed.....
Logged

Offline bryancobb

  • Silver Level Subscriber
  • Hero Member
  • ****
  • Posts: 1077
  • 2009 Ridn' Around
Re: 65 Oil Filter Stamp
« Reply #42 on: November 21, 2011, 07:34:56 AM »
If the filters were installed when the enines were painted...(makes sense) ...then it makes ABSOLUTELY NO SENSE WHATSOEVER for Ford to go to the time and expense of putting any markings on them.

Any markings on the filters would only serve the purpose of tracability to the manufacturer in case there was any quality issues.
Logged
66 Metuch Conv
Nightmist, Std Blu Int
6T08C223904    76A       K         22       15c     21      6        6
                      BODY  COLOR   TRIM    DATE   DSO   AXLE  XMSN
   C/O  785                                   (rotation #)
   16    C14   6T08C223904        (weld bay 16, bucked MAR 14)

Offline Twilight65

  • Gold Level Subscriber
  • Sr. Member
  • *****
  • Posts: 380
Re: 65 Oil Filter Stamp
« Reply #43 on: November 21, 2011, 01:20:30 PM »
Quote from: autonomousbronco on November 19, 2011, 03:16:21 PM
@ kiehlr, I don't know how to post an image but I have a picture of an original oil filter that's painted black on the block and then ink stamped. I can post it if someone tells me how or email to you. Also, if you have a Mustang Monthly from February 1988, on pg 18 the first image on the top left shows a filter that was painted on the block and then stamped; again I don't mind scanning and then posting the image or emailing it to you.

Heres the Pictures
Dave


Logged
65 Coupe Dearborn Scheduled Build July 9,1965 289/C4
66 Sprint Conv. Dearborn Scheduled Build May 13, 1966 200/C4

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24627
Re: 65 Oil Filter Stamp
« Reply #44 on: November 21, 2011, 01:51:52 PM »
We do have to consider that many/at least some of the original oil filters we see pictures of today were ones that were smuggled out as lunch pail parts by workers so they.

Just a consideration
Logged
Jeff Speegle

Anything worth doing is worth doing concours ;)
Pages: 1 2 [3] 4 5 6   Go Up
« previous next »