« previous next »
Pages: [1]   Go Down

Author Topic: Deluxe steering wheel  (Read 1492 times)

Offline rocnhrse

  • Full Member
  • ***
  • Posts: 135
Deluxe steering wheel
« on: November 05, 2020, 08:35:07 PM »
I obtained a  excellent  deluxe  steering wheel, which  I would  like to install  in my 67 that has the deluxe  interior but a standard steering wheel.
Before I  jump into this,is it a simple swap, or is it more  involved than that.
Logged
67 mustang  GTA  S code fastback  San Jose  April 67

Offline 196667Bob

  • Hero Member
  • *****
  • Posts: 1057
Re: Deluxe steering wheel
« Reply #1 on: November 05, 2020, 10:24:22 PM »
Yes, this can be a simple swap ; that is if you have all of the special additional parts that are required for the Deluxe Steering Wheel that are either different or not required for the Standard Steering Wheel. Hopefully, you received all of them with the Steering Wheel itself ?

Illustrations of both are attached.

Bob
« Last Edit: November 06, 2020, 08:17:30 PM by 196667Bob »
Logged
1966 Coupe, C Code, 3 Sp MT, 6T07C154XXX, Build Date 11/22/65
1967 Conv, C Code, C4, 7F03C154XXX, Actual Build Date 01/31/67
MCA 04909

Offline rocnhrse

  • Full Member
  • ***
  • Posts: 135
Re: Deluxe steering wheel
« Reply #2 on: November 06, 2020, 08:46:04 AM »
No,all I got was the wheel,I will study the drawings,and shop for more  parts
Logged
67 mustang  GTA  S code fastback  San Jose  April 67

Offline 67gtasanjose

  • Hero Member
  • *****
  • Posts: 5097
  • "Take the MUSTANG PLEDGE"
Re: Deluxe steering wheel
« Reply #3 on: November 06, 2020, 03:14:36 PM »
Quote from: rocnhrse on November 06, 2020, 08:46:04 AM
No,all I got was the wheel,I will study the drawings,and shop for more  parts
A picture of what you DO HAVE could help...there are some pieces that only original parts will help you. Other pieces (at times) might be available aftermarket.
Logged
Richard Urch

1967 (11/2/66, S.J.) GTA Luxury Coupe, 289-4V w/Thermactor Emissions, C-4, Int./Ext. Decor +many options

2005 (04/05) GT Premium Convertible, Windveil Blue, Parchment Top w/Med. Parchment interior,  Roush Body Appointments

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7440
Re: Deluxe steering wheel
« Reply #4 on: November 06, 2020, 04:16:12 PM »
Quote from: 196667Bob on November 05, 2020, 10:24:22 PM
Illustrations of both are attached.
Bob,
I think the third picture is 65-66 only. The number ID in the lower corner, P-4955 is reference on the 65-66 drawing.
Jim
Logged
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline 196667Bob

  • Hero Member
  • *****
  • Posts: 1057
Re: Deluxe steering wheel
« Reply #5 on: November 06, 2020, 08:16:50 PM »
Jim : I agree with you. I "grabbed" it right out of the "1967 Only" MPC, and didn't really check it, just incorrectly assuming that it was 1967. After you brought it up, I looked at my "1966 Only" MPC, and sure enough, same exact illustration. Just another case of Ford grabbing a previous drawing without checking the details.

I'll go back and remove it to avoid any confusion. If someone comes up with documentation of  1966 Deluxe Wheel and components being used in 1967, we can address it then.

Thanks for catching this.

Bob
« Last Edit: November 07, 2020, 12:46:59 AM by 196667Bob »
Logged
1966 Coupe, C Code, 3 Sp MT, 6T07C154XXX, Build Date 11/22/65
1967 Conv, C Code, C4, 7F03C154XXX, Actual Build Date 01/31/67
MCA 04909

Offline 196667Bob

  • Hero Member
  • *****
  • Posts: 1057
Re: Deluxe steering wheel
« Reply #6 on: November 07, 2020, 12:39:31 PM »
Referring to the second Illustration I previously Posted, following are the complete Service Part Numbers of those parts that are different from, or in addition to those for the "Standard" (non-Wood Grain) Steering Wheel.
If a part on the Illustration is not listed below, it is either the same as the non-Wood Grain Steering Wheel, or in the case of 13A848, it was not available as a Service Part.

C5ZZ-3491-A (w/o PS)

C7OZ-3491-A (w/PS)

C7OZ-3600-S (w/PS - 16" dia)

C7AZ-3600-T (w/o PS)

C7ZZ-3623-H thru -P (Depending on Interior Color)

C7OZ-3656-A (w/PS)

C7OZ-3656-B (w/o PS)

C5ZZ-3C3680-A

C7OZ-13A805-B

C5ZZ-13A807-B (3 required)

C7SZ-13318-B (ONLY w/ TILT WHEEL)

C6OZ-13A832-A

C7OZ-13A865-D

C6OZ-13A889-A

C5ZZ-13A890-A

C5ZZ-13A891-A

44710-S (#8 Flat Washer - 3 required)

52792-S (#6-20 x 5/8", pan head phillips, self tapping)

52812-S ( #6-20 x 1", pan head phillips, self tapping - 3 required)

Hopefully, I haven't missed anything.

Hope  this helps.

Bob
Logged
1966 Coupe, C Code, 3 Sp MT, 6T07C154XXX, Build Date 11/22/65
1967 Conv, C Code, C4, 7F03C154XXX, Actual Build Date 01/31/67
MCA 04909

Offline rocnhrse

  • Full Member
  • ***
  • Posts: 135
Re: Deluxe steering wheel
« Reply #7 on: November 07, 2020, 01:57:24 PM »
Thanks Bob, it does  help,I  will  get through the list,I tried  to post pictures  but didn't have any  luck,must be doing  something wrong
Logged
67 mustang  GTA  S code fastback  San Jose  April 67

9TO2Hknot4cell

  • Guest
Re: Deluxe steering wheel
« Reply #8 on: November 08, 2020, 02:02:37 PM »
Quote from: rocnhrse on November 06, 2020, 08:46:04 AM
No,all I got was the wheel,I will study the drawings,and shop for more  parts
rocnhrse, PM me. I have parts for a 67 deluxe wheel for sale.
Logged
Pages: [1]   Go Up
« previous next »