« previous next »
Pages: [1]   Go Down

Author Topic: Instrument cluster rubber insulators  (Read 732 times)

Offline Hipo giddyup

  • Hero Member
  • *****
  • Posts: 1207
  • There is no end to doing right. Giddyup!!!
Instrument cluster rubber insulators
« on: August 31, 2020, 04:47:27 PM »
Hope I'm describing this correctly.. There are small rubber insulators that go between the cluster and the gauge lens for each of the three clusters. I have found these insulators to be hard as plastic and breaking apart from age. I found a similar diameter rubber hose I could cut into sections to use for this but I am uncertain of the exact length?? Anyone have more info on these "insulators"?
Logged
1967 Springtime Yellow Coupe, 289 2v 3spd, Metuchen built, Nov. 17th 66'
1966 Sahara Beige Coupe, 289 2v 3spd, Dearborn built, July 21st 66'
1964 1/2 Pagoda Green Coupe, 260 2v 3spd, Dearborn built, June 30th 64'
1966 GT350 Fastback clone, 289 HiPo, 725cfm Holley, 4spd, SanJose built, Nov 25th 65'

Offline Hipo giddyup

  • Hero Member
  • *****
  • Posts: 1207
  • There is no end to doing right. Giddyup!!!
Re: Instrument cluster rubber insulators
« Reply #1 on: September 03, 2020, 01:07:01 PM »
Bump, anyone have an idea on the length?? I'll try and post a pic soon.
Logged
1967 Springtime Yellow Coupe, 289 2v 3spd, Metuchen built, Nov. 17th 66'
1966 Sahara Beige Coupe, 289 2v 3spd, Dearborn built, July 21st 66'
1964 1/2 Pagoda Green Coupe, 260 2v 3spd, Dearborn built, June 30th 64'
1966 GT350 Fastback clone, 289 HiPo, 725cfm Holley, 4spd, SanJose built, Nov 25th 65'

Offline KevinK

  • Hero Member
  • *****
  • Posts: 560
Re: Instrument cluster rubber insulators
« Reply #2 on: September 03, 2020, 04:12:59 PM »
Picture? I can’t picture them right now.
Logged
MCA #33800, Gold Card 3rd Gen
BAMA Member
67 Coupe, 69 Coupe, 74 Coupe, 84 SVO, 84 GT Turbo, 86 GT, 88 McLaren, 89 LX Sport, 03 Mach 1, 07 GT500, 14 GT/CS

Offline cobrajet_carl

  • Sr. Member
  • ****
  • Posts: 363
Re: Instrument cluster rubber insulators
« Reply #3 on: September 03, 2020, 06:23:32 PM »
Length is no more than 5/16" or so maybe 3/8" if they shrank any
« Last Edit: September 03, 2020, 06:27:27 PM by cobrajet_carl »
Logged
Carl
70 and 71 Dearborn mach Is

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9369
Re: Instrument cluster rubber insulators
« Reply #4 on: September 03, 2020, 07:57:58 PM »
Logged
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline midlife

  • Wiring Guru---let me check your shorts!
  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2177
    • Midlife Harness Restorations
Re: Instrument cluster rubber insulators
« Reply #5 on: September 03, 2020, 08:38:13 PM »
Logged
Midlife Harness Restorations - http://midlifeharness.com

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9369
Re: Instrument cluster rubber insulators
« Reply #6 on: September 04, 2020, 12:35:56 AM »
Quote from: midlife on September 03, 2020, 08:38:13 PM
And that's about $0.10 in materials...
What I was thinking too.
Logged
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline Hipo giddyup

  • Hero Member
  • *****
  • Posts: 1207
  • There is no end to doing right. Giddyup!!!
Re: Instrument cluster rubber insulators
« Reply #7 on: September 04, 2020, 05:17:56 PM »
Thanks everyone.
Yep, that's why my spare washer hose will be used here, probrably what Ford did anyway. ;)
Logged
1967 Springtime Yellow Coupe, 289 2v 3spd, Metuchen built, Nov. 17th 66'
1966 Sahara Beige Coupe, 289 2v 3spd, Dearborn built, July 21st 66'
1964 1/2 Pagoda Green Coupe, 260 2v 3spd, Dearborn built, June 30th 64'
1966 GT350 Fastback clone, 289 HiPo, 725cfm Holley, 4spd, SanJose built, Nov 25th 65'
Pages: [1]   Go Up
« previous next »