Join us on Facebook: Search for 'ConcoursMustang' Private group!https://www.facebook.com/groups/concoursmustang/SAAC-50 , Sonoma, CA August 21-24, 2025http://www.saac.com/
My October 64 goes UNDER the rear fiberglass panels
Also approx location of the screws would be helpful. I was able to identify 6 of the holes but not sure if they are in the right area
Also another follow up question. Car originally came with a full length console and was a 4 speed. How would the wiring for the console come up from the carpet?
So where the console feed connects with the feed from the car, where do they connect at? Is there supposed to be enough slack on the console feed to slip under the rear section of the front portion carpet or am I supposed to cut a slit near the shifter for the wires to connect to? With an automatic you can feed the wires through the shifter cut since it used a different mounting system with a console compared to non-console. With a four speed the console just sits over the shifter boot with no modification.
One last question, the front bracket for the full length console, does that get mounted on top of the carpet or is the carpet slit so the bottom mounting portion of the bracket is under the carpet and sits flush with the hump?