« previous next »
Pages: [1]   Go Down

Author Topic: Dashpot on Autolite 4300 C9ZF-D required?  (Read 1043 times)

Offline Harry1003

  • Newbie
  • *
  • Posts: 26
Dashpot on Autolite 4300 C9ZF-D required?
« on: July 30, 2020, 12:54:48 PM »
Hello,
I have a Autolite carburetor 4300 with the number C9ZF-D on my 1969 Mach 1 H-Code (FMX/PS/PB/AC build 03/11/69 at SJ)
The Mach was converted to 4V many years ago.
In the workshop manual (Page 10-11-03), the word "none" is in the gap setting table for the dashpot.

Does that mean that no dashpot was installed on the carburetor, or that the distance should be set to zero?

Thank you in advance!!!

Greetings
Harry
Logged

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24545
Re: Dashpot on Autolite 4300 C9ZF-D required?
« Reply #1 on: July 30, 2020, 10:28:49 PM »
Since I lack allot of pictures of M code 69's I suggest that you look through the Assembly Manual that covers the engine assembly.

Lacking that I can report that I did find F, H and M's with the non-electrical style dashpots and or brackets for them on unrestored cars.
Logged
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline Harry1003

  • Newbie
  • *
  • Posts: 26
Re: Dashpot on Autolite 4300 C9ZF-D required?
« Reply #2 on: July 31, 2020, 01:27:56 AM »
Hello,
Thanks a lot Jeff!

Of course, I didn't think of the simplest thing. Shame on me.
I'll look it up tonight.

Greetings
Harry
Logged

Offline Harry1003

  • Newbie
  • *
  • Posts: 26
Re: Dashpot on Autolite 4300 C9ZF-D required?
« Reply #3 on: July 31, 2020, 10:46:42 AM »
Hello,
I have also found nothing in the assembly manual and the explodet view manual, except this picture.
As I understand it, there is no dashpot on my carburetor.

Maybe someone else will answer.

Greetings :)
Harry
Logged

Offline RoyceP

  • Hero Member
  • *****
  • Posts: 1536
Re: Dashpot on Autolite 4300 C9ZF-D required?
« Reply #4 on: July 31, 2020, 11:29:42 AM »
That drawing says 351 with manual transmission. - is yours manual or auto? No dashpot if auto trans.


Quote from: Harry1003 on July 31, 2020, 10:46:42 AM
Hello,
I have also found nothing in the assembly manual and the explodet view manual, except this picture.
As I understand it, there is no dashpot on my carburetor.

Maybe someone else will answer.

Greetings :)
Harry
Logged
1968 W code 427 Cougar XR-7 GTE Feb 23 Dearborn C6 / 3.50 open
1968 R code 428CJ Cougar XR-7 May 13 Dearborn C6 / 3.91 T - Lock

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24545
Re: Dashpot on Autolite 4300 C9ZF-D required?
« Reply #5 on: July 31, 2020, 07:11:47 PM »
Hard to understand what they were used on H and F code automatics with AC. Do have an empty bracket on a 4300 (M code) automatic car. And then you have similar applications in 70   

A head scratcher IMHO at this point. Wish I have more pictures of the really nice cars we have pictures of with the air cleaners off and out of the way. Would make it a bit easier since the assembly manuals and other printed documents can and do have mistakes/differences between the way they wanted and the way they were. But they are a place to start
Logged
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline Harry1003

  • Newbie
  • *
  • Posts: 26
Re: Dashpot on Autolite 4300 C9ZF-D required?
« Reply #6 on: July 31, 2020, 07:22:57 PM »
Hi,
Yes, my car has an automatic transmission (FMX)
Thanks for the confirmation!

@Jeff: I would also like more pictures.

 
Thank you for your support!!!

Greetings :)
Harry
Logged
Pages: [1]   Go Up
« previous next »