« previous next »
Pages: [1]   Go Down

Author Topic: 1966 GT350 Heater Hose Routing  (Read 2263 times)

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24623
1966 GT350 Heater Hose Routing
« on: April 18, 2020, 06:42:20 PM »
Replied to and posted some pictures in response to a question on another site and thought I should duplicate the post over here to help out current and future members

--------------------------------------------------------------------------------------------------------------------------
Appears that the hose from the intake manifold was routed lower most heater hose connection at the firewall

Hope these original picture help. Notice the hoses wrapped around each other to keep them together on these different examples









Logged
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline Hipo giddyup

  • Hero Member
  • *****
  • Posts: 1207
  • There is no end to doing right. Giddyup!!!
Re: 1966 GT350 Heater Hose Routing
« Reply #1 on: April 20, 2020, 02:40:48 PM »
Very interesting Jeff. Any reasoning behind why they "wrapped" the hoses? One would think seperated they might dissipate heat better??
Logged
1967 Springtime Yellow Coupe, 289 2v 3spd, Metuchen built, Nov. 17th 66'
1966 Sahara Beige Coupe, 289 2v 3spd, Dearborn built, July 21st 66'
1964 1/2 Pagoda Green Coupe, 260 2v 3spd, Dearborn built, June 30th 64'
1966 GT350 Fastback clone, 289 HiPo, 725cfm Holley, 4spd, SanJose built, Nov 25th 65'

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24623
Re: 1966 GT350 Heater Hose Routing
« Reply #2 on: April 20, 2020, 03:15:19 PM »
Quote from: Hipo giddyup on April 20, 2020, 02:40:48 PM
Very interesting Jeff. Any reasoning behind why they "wrapped" the hoses? One would think separated they might dissipate heat better??

On some applications Ford used aluminum ties to hold them together. Kept things neat but more importantly IMHO they likely made installation quicker. In this case I would guess it was to keep them together and tucked nicely between the intake and valve covers  since one of them (like in other applications) didn't need to be routed to the carburetor choke cover.

Someone apparently thought it was a good idea. Not sure if it was the engineers or the workers on the line
Logged
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline OldGuy

  • Full Member
  • ***
  • Posts: 110
Re: 1966 GT350 Heater Hose Routing
« Reply #3 on: April 20, 2020, 08:42:11 PM »

Someone apparently thought it was a good idea. Not sure if it was the engineers or the workers on the line
[/quote]

My guess would be that the "workers" thought of this fix. It's just too simple and not eloquent enough for an engineer to have thought of it.
Logged

Offline midlife

  • Wiring Guru---let me check your shorts!
  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2175
    • Midlife Harness Restorations
Re: 1966 GT350 Heater Hose Routing
« Reply #4 on: April 20, 2020, 09:58:36 PM »
Quote from: OldGuy on April 20, 2020, 08:42:11 PM
Someone apparently thought it was a good idea. Not sure if it was the engineers or the workers on the line


My guess would be that the "workers" thought of this fix. It's just too simple and not eloquent enough for an engineer to have thought of it.
As a systems engineer (retired), I resemble that remark!
Logged
Midlife Harness Restorations - http://midlifeharness.com

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7346
Re: 1966 GT350 Heater Hose Routing
« Reply #5 on: April 21, 2020, 12:29:26 AM »
Quote from: midlife on April 20, 2020, 09:58:36 PM
As a systems engineer (retired), I resemble that remark!
As a technician, we had a saying -
Make it simple enough for an engineer to understand and you won't have any problems.
Then I became an engineer. Now I understand.
Jim
Logged
I promise to be politically correct in all my posts to keep the BBBB from vociferating.
Pages: [1]   Go Up
« previous next »