Author Topic: Main harness assembly question  (Read 523 times)

Offline fmr187

  • Jr. Member
  • **
  • Posts: 95
Main harness assembly question
« on: January 20, 2020, 05:09:18 PM »
In reviewing my main harness I noticed 2 wire straps holding some of the wires together in a group. I don't remember doing this when I disassembled. The wires look old.  So I am wondering if this was a factory procedure? See 1 and 11 oclock in my pics.
65 Convertible born in Dearborn on Feb 10

Offline 67gta289

  • Hero Member
  • *****
  • Posts: 3080
Re: Main harness assembly question
« Reply #1 on: January 20, 2020, 05:20:31 PM »
Are you talking about the black insulated pieces of copper wire twisted together shown in yellow in the attached picture?  If so, those are not original.
John
67 289 GTA Dec 20 1966 San Jose
7R02C156xxx
MCA 74660

Offline midlife

  • Wiring Guru---let me check your shorts!
  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2175
    • Midlife Harness Restorations
Re: Main harness assembly question
« Reply #2 on: January 20, 2020, 05:21:57 PM »
Never seen that in over 300 64.5-66 harnesses.
Midlife Harness Restorations - http://midlifeharness.com

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7346
Re: Main harness assembly question
« Reply #3 on: January 20, 2020, 07:21:07 PM »
In reviewing my main harness I noticed 2 wire straps holding some of the wires together in a group.
Those are examples of "modern" technology, like in the 1980-90 era.
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline fmr187

  • Jr. Member
  • **
  • Posts: 95
Re: Main harness assembly question
« Reply #4 on: January 21, 2020, 12:14:49 PM »
that's exactly what I am referring too. Thanks for the responses  It looked odd to me but I had to ask. Now I know to remove them.
65 Convertible born in Dearborn on Feb 10