Author Topic: 66-Oil pan plug  (Read 2187 times)

Offline GT350Lad

  • Newbie
  • *
  • Posts: 16
66-Oil pan plug
« on: August 24, 2019, 12:43:23 AM »
Hi guys, what oil pan plug was used on the 65/66 cobra oil pan? Was it the standard v8 one? And if so was it like this in my pic?
Cheers
« Last Edit: August 24, 2019, 05:58:57 AM by J_Speegle »

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9317
Re: Oil pan plug
« Reply #1 on: August 24, 2019, 01:55:19 AM »
Hi guys, what oil pan plug was used on the 65/66 cobra oil pan? Was it the standard v8 one? And if so was it like this in my pic?
Cheers
Standard bolt. That makers mark on the bolt does not look familiar .
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline GT350Lad

  • Newbie
  • *
  • Posts: 16
Re: Oil pan plug
« Reply #2 on: August 24, 2019, 02:06:09 AM »
Ok thanks Bob, what should I be looking for in my box of 1000 bolts?
Cheers

Offline GT350Lad

  • Newbie
  • *
  • Posts: 16
Re: Oil pan plug
« Reply #3 on: August 24, 2019, 05:20:49 AM »
Found one, it’s just got a capital ‘A’ on it, correct?

Cheers

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9317
Re: Oil pan plug
« Reply #4 on: August 25, 2019, 12:57:22 AM »
Found one, it’s just got a capital ‘A’ on it, correct?

Cheers
The typical one is plain no makers mark from what I have seen. The others you mentioned are original on various year sheet metal oil pans however . Most likely different oil pan mfg's used different sources for the bolts.
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline GT350Lad

  • Newbie
  • *
  • Posts: 16
Re: 66-Oil pan plug
« Reply #5 on: August 25, 2019, 02:48:05 AM »
Thanks Bob, I’ll keep looking

Cheers

Offline Kingchief

  • Jr. Member
  • **
  • Posts: 65
Re: 66-Oil pan plug
« Reply #6 on: August 26, 2019, 04:21:35 PM »
A picture of an original one might help you in your search.  If anyone has one why not post it!

Good luck,

Steve
SFM 6S406

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9317
Re: 66-Oil pan plug
« Reply #7 on: August 26, 2019, 06:08:23 PM »
A picture of an original one might help you in your search.  If anyone has one why not post it!

Good luck,

Steve
Not much to see given no markings on most that I have seen . Makes it kind of easy to find a replacement IMO. 
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24578
Re: 66-Oil pan plug
« Reply #8 on: August 26, 2019, 06:16:56 PM »
Took a quick look through my pictures and could not find a clear picture handy. Believe you would likely modify the one you have by removing just the raised castings on the one you have.  Wil try and look in the garage to see if one of mine might have an original still in it
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline GT350Lad

  • Newbie
  • *
  • Posts: 16
Re: 66-Oil pan plug
« Reply #9 on: August 26, 2019, 06:27:25 PM »
Thanks Bob and Jeff, appreciate it