Author Topic: 70 clutch fork return spring[s] at bellhousing (Read 4243 times)

bgp429 · « **on:** July 11, 2019, 10:58:22 AM »

Couldn't find anything using the search, does anyone have a picture of the external return spring or springs at the fork. Would like to see the arrangement and attaching points on both ends. Late 70 Dearborn Boss 302. Thankyou

hopeto · « **Reply #1 on:** October 01, 2019, 06:04:17 PM »

with and without the fork boot. Late April Dearborn. Hope this helps.

bgp429 · « **Reply #2 on:** October 02, 2019, 12:42:29 PM »

Thanks, that is what I needed. The pedal return was very light after re-installation of the under dash spring. Someone had "improved" the original design before I purchased the car.

hopey · « **Reply #3 on:** October 03, 2019, 12:04:28 AM »

Jam nuts are wrong in the photo. They should both be on the inside of the swivel pin, otherwise the adjuster rod will bind and bend.

hopeto · « **Reply #4 on:** October 04, 2019, 10:40:53 AM »

Quote

Jam nuts are wrong in the photo.

Thanks, corrected.

hopey · « **Reply #5 on:** October 25, 2019, 02:03:27 PM »

What color should the spring be?

boss167961 · « **Reply #6 on:** November 04, 2019, 11:22:18 PM »

Quote from: hopey on October 25, 2019, 02:03:27 PM

What color should the spring be?

Semi gloss black

News:

Author Topic: 70 clutch fork return spring[s] at bellhousing (Read 4243 times)

bgp429

70 clutch fork return spring[s] at bellhousing

hopeto

Re: clutch fork return spring[s] at bellhousing

bgp429

Re: clutch fork return spring[s] at bellhousing

hopey

Re: clutch fork return spring[s] at bellhousing

hopeto

Re: clutch fork return spring[s] at bellhousing

hopey

Re: clutch fork return spring[s] at bellhousing

boss167961

Re: clutch fork return spring[s] at bellhousing