Topic: Throttle Cable and Coil Brackets

[1970 Snake]

Can someone please advise the correct color and finish of the throttle cable bracket and the coil mounting bracket on a 1970 428 CJ R-Code Dearborn built mustang.
Also would like to know if the intake air filter housing bracket that comes off the engine is black or Ford blue?

[cobrajet_carl]

I'm not positive mine are original, but the coil and throttle brackets look like P&O while the shaker bracket looks like black paint.

[J_Speegle]

Can someone please advise the correct color and finish of the throttle cable bracket and the coil mounting bracket on a 1970 428 CJ R-Code Dearborn built mustang.

Also would like to know if the intake air filter housing bracket that comes off the engine is black or Ford blue?

A picture from the following thread might help you out

http://www.concoursmustang.com/forum/index.php?topic=10002.new#new





So that should answer the coil bracket and the shaker to intake support. The throttle bracket from my understanding would also typically be P&O

Hope this helps

[Mike_B_SVT]

So that should answer the coil bracket and the shaker to intake support. The throttle bracket from my understanding would also typically be P&O

Hope this helps

There was a recent discussion on the 428CJ forum about the 70 CJ throttle bracket.  P&O for originals, and it appears that service replacements were painted black.

[J_Speegle]

There was a recent discussion on the 428CJ forum about the 70 CJ throttle bracket.  ...........

Thanks Mike saw the discussion and it help support what I was finding in my records

[cobrajet_carl]

So that should answer the coil bracket and the shaker to intake support. The throttle bracket from my understanding would also typically be P&O

Hope this helps

I can't really tell from the pic but are you saying the shaker bracket is also P&O?

[J_Speegle]

I can't really tell from the pic but are you saying the shaker bracket is also P&O?

This help?



Appears to be semi-gloss black (may be dipped) finish, to me

[cobrajet_carl]

OK, so I guess mine is correct then. Although I can't tell if dipped or sprayed or gloss. Funny what 48 years will do...

[1970 Snake]

Thanks for all the input guys, I suspected the coil and throttle brackets where P&O but wasn't sure about the shaker support bracket, but will be finishing it in semi-gloss black.