« previous next »
Pages: 1 [2]   Go Down

Author Topic: Rubber transmission line connection to radiator for 65  (Read 2219 times)

Offline ChrisV289

  • Hero Member
  • *****
  • Posts: 1965
Re: Rubber transmission line connection to radiator for 65
« Reply #15 on: May 21, 2018, 04:38:27 PM »
So just to confirm, a SJ car built 10/29/64 should have the tower clamps correct?  I was able to secure a set of 4 from American Mustang parts LLC
Logged
Chris
1965 Honey Gold Fastback (SJ 10/29/64)
1965 Caspian Blue Fastback (SJ 06/03/65)
2009 V6 Mustang Coupe

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7687
Re: Rubber transmission line connection to radiator for 65
« Reply #16 on: May 23, 2018, 02:58:27 PM »
Quote from: ChrisV289 on May 21, 2018, 04:38:27 PM
So just to confirm, a SJ car built 10/29/64 should have the tower clamps correct?  I was able to secure a set of 4 from American Mustang parts LLC

I posted earlier a Feb '65 SJ example with crimp clamps, which is what your car should have.  The tower clamps came later.
Logged
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline 66RavenGTCoupeAgain

  • Full Member
  • ***
  • Posts: 200
Re: Rubber transmission line connection to radiator for 65
« Reply #17 on: September 18, 2018, 10:05:09 PM »
Great info on here guys! Do we know if the barbed fittings on the radiator for the oil lines were painted with the radiator or not?
Logged
66 Metuchen NJ  GT Coupe
Raven with Deluxe Black Int 289 A Code C4 PS Tinted Windows (Green) Dealer installed Rear Speaker
6T07A1612## Dec 65 Build
65 San Jose CA Convertible Rangoon Red with White Int and Power Top with plastic rear window 289 C Code C4 PS PB AC Fog Lights
5R08C1496## Oct 64 Build

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24620
Re: Rubber transmission line connection to radiator for 65
« Reply #18 on: September 18, 2018, 10:20:36 PM »
Quote from: 66RavenGTCoupeAgain on September 18, 2018, 10:05:09 PM
........... Do we know if the barbed fittings on the radiator for the oil lines were painted with the radiator or not?

Not certain but they may have been added after the radiator was received at the plant and after the radiator was painted. Would invite out other members more familiar with this detail to share

Logged
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline 66RavenGTCoupeAgain

  • Full Member
  • ***
  • Posts: 200
Re: Rubber transmission line connection to radiator for 65
« Reply #19 on: September 18, 2018, 10:41:56 PM »
Yes that would be great, thanks. Chris???
Logged
66 Metuchen NJ  GT Coupe
Raven with Deluxe Black Int 289 A Code C4 PS Tinted Windows (Green) Dealer installed Rear Speaker
6T07A1612## Dec 65 Build
65 San Jose CA Convertible Rangoon Red with White Int and Power Top with plastic rear window 289 C Code C4 PS PB AC Fog Lights
5R08C1496## Oct 64 Build

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7346
Re: Rubber transmission line connection to radiator for 65
« Reply #20 on: September 19, 2018, 12:23:17 AM »
Quote from: 66RavenGTCoupeAgain on September 18, 2018, 10:05:09 PM
Do we know if the barbed fittings on the radiator for the oil lines were painted with the radiator or not?
Probably not. First, the fittings might get damaged in shipping so they were not installed. Second, they are shown in the Assembly Manual, which would indicate an assembly line step.
Quote from: ChrisV289 on May 21, 2018, 04:38:27 PM
So just to confirm, a SJ car built 10/29/64 should have the tower clamps correct? 
Quote from: CharlesTurner on May 23, 2018, 02:58:27 PM
I posted earlier a Feb '65 SJ example with crimp clamps, which is what your car should have.  The tower clamps came later.
The 64 Chassis Assembly Manual shows either being used. That's before. More research required?
Jim

Logged
I promise to be politically correct in all my posts to keep the BBBB from vociferating.
Pages: 1 [2]   Go Up
« previous next »