« previous next »
Pages: [1]   Go Down

Author Topic: 66 C-Code Single Groove pulley's  (Read 1243 times)

Offline rrenz

  • Sr. Member
  • ****
  • Posts: 344
66 C-Code Single Groove pulley's
« on: January 13, 2018, 08:59:53 PM »
In search of original Single groove water and crank pulleys for my late January c code. For the water pump would a C5AE-8509-B be suitable? C5AZ-6312-B for the crank? Ive seen some reproduction water pump pulley's that appear to be of a 2 piece design.
« Last Edit: January 13, 2018, 10:59:07 PM by J_Speegle »
Logged
Ryan
1966 C Code NJ Springtime Yellow
C-4 Automatic
Build Date Jan 21st
2001 3.8 Mustang Convertible
2004 40th Anniversary

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7346
Re: 66 C-Code Single Groove pulley's
« Reply #1 on: January 14, 2018, 12:13:32 AM »
Ryan,
Did you look in the library? In any case, I think that you will find almost all the upper and lower pulleys are multiple pieces.
Jim
Logged
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline rrenz

  • Sr. Member
  • ****
  • Posts: 344
Re: 66 C-Code Single Groove pulley's
« Reply #2 on: January 14, 2018, 10:59:55 AM »
Thanks. Didn't realize there was a spreadsheet on this.
Logged
Ryan
1966 C Code NJ Springtime Yellow
C-4 Automatic
Build Date Jan 21st
2001 3.8 Mustang Convertible
2004 40th Anniversary

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24623
Re: 66 C-Code Single Groove pulley's
« Reply #3 on: January 14, 2018, 03:36:31 PM »
Remember that though some pulleys are made from multiple pieces they are not designed to come apart and be used separately
Logged
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline Hipo giddyup

  • Hero Member
  • *****
  • Posts: 1207
  • There is no end to doing right. Giddyup!!!
Re: 66 C-Code Single Groove pulley's
« Reply #4 on: January 15, 2018, 09:17:17 AM »
Hi rrenz . PM me if you are still searching for those pulleys. I have a stack from previous 289s that I have scavenged and might have what you need. Plus I think you're not too far from me which would make for cheaper shipping. Just trying to help..  ;)
Logged
1967 Springtime Yellow Coupe, 289 2v 3spd, Metuchen built, Nov. 17th 66'
1966 Sahara Beige Coupe, 289 2v 3spd, Dearborn built, July 21st 66'
1964 1/2 Pagoda Green Coupe, 260 2v 3spd, Dearborn built, June 30th 64'
1966 GT350 Fastback clone, 289 HiPo, 725cfm Holley, 4spd, SanJose built, Nov 25th 65'

Offline Hipo giddyup

  • Hero Member
  • *****
  • Posts: 1207
  • There is no end to doing right. Giddyup!!!
Re: 66 C-Code Single Groove pulley's
« Reply #5 on: January 16, 2018, 10:33:53 PM »
Unfortunately I do not seem to have single groove pulleys with the stamps you are looking for..  :'(
Logged
1967 Springtime Yellow Coupe, 289 2v 3spd, Metuchen built, Nov. 17th 66'
1966 Sahara Beige Coupe, 289 2v 3spd, Dearborn built, July 21st 66'
1964 1/2 Pagoda Green Coupe, 260 2v 3spd, Dearborn built, June 30th 64'
1966 GT350 Fastback clone, 289 HiPo, 725cfm Holley, 4spd, SanJose built, Nov 25th 65'

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9361
Re: 66 C-Code Single Groove pulley's
« Reply #6 on: January 16, 2018, 11:05:30 PM »
Quote from: rrenz on January 13, 2018, 08:59:53 PM
In search of original Single groove water and crank pulleys for my late January c code. For the water pump would a C5AE-8509-B be suitable? C5AZ-6312-B for the crank? Ive seen some reproduction water pump pulley's that appear to be of a 2 piece design.
I think the C5AE-A crank pulley goes with the C5AE-B W/P pulley.
Logged
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline rrenz

  • Sr. Member
  • ****
  • Posts: 344
Re: 66 C-Code Single Groove pulley's
« Reply #7 on: February 03, 2018, 01:46:05 PM »
Many thanks to Hipo giddyup for helping me out with some pulleys. Finally got this project wrapped up. Previous car this engine was in was set up with AC so finally got the pulleys, fan and water pump bolts replaced.
Logged
Ryan
1966 C Code NJ Springtime Yellow
C-4 Automatic
Build Date Jan 21st
2001 3.8 Mustang Convertible
2004 40th Anniversary

Offline Hipo giddyup

  • Hero Member
  • *****
  • Posts: 1207
  • There is no end to doing right. Giddyup!!!
Re: 66 C-Code Single Groove pulley's
« Reply #8 on: February 03, 2018, 03:00:05 PM »
Glad I could help and man does that compartment look nice and clean!
Logged
1967 Springtime Yellow Coupe, 289 2v 3spd, Metuchen built, Nov. 17th 66'
1966 Sahara Beige Coupe, 289 2v 3spd, Dearborn built, July 21st 66'
1964 1/2 Pagoda Green Coupe, 260 2v 3spd, Dearborn built, June 30th 64'
1966 GT350 Fastback clone, 289 HiPo, 725cfm Holley, 4spd, SanJose built, Nov 25th 65'

Offline rrenz

  • Sr. Member
  • ****
  • Posts: 344
Re: 66 C-Code Single Groove pulley's
« Reply #9 on: February 08, 2018, 05:53:30 PM »
Quote from: Hipo giddyup on February 03, 2018, 03:00:05 PM
Glad I could help and man does that compartment look nice and clean!

Thanks. Im still plugging away at minor details here and there but very happy with where I've gotten to. None of which would of been possible without this site for sure.
Logged
Ryan
1966 C Code NJ Springtime Yellow
C-4 Automatic
Build Date Jan 21st
2001 3.8 Mustang Convertible
2004 40th Anniversary
Pages: [1]   Go Up
« previous next »