Author Topic: 1965 change-over from 2 to 3 speed heaters  (Read 835 times)

Offline midlife

  • Wiring Guru---let me check your shorts!
  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2174
    • Midlife Harness Restorations
1965 change-over from 2 to 3 speed heaters
« on: April 07, 2017, 09:02:41 PM »
Just curious when the 65 model year (not 64.5) changed from 2 to 3 speed heaters.  Why?  There are two different underdash harness configurations, and am just curious as to the date or VIN change-over.  I have customers wanting an underdash harness for their shell and I have to ask a whole lot of questions about heater blower wires and switch designs to figure out what the correct harness is.


Midlife Harness Restorations - http://midlifeharness.com

Offline markb0729

  • Sr. Member
  • ****
  • Posts: 480
  • South Jersey
Re: 1965 change-over from 2 to 3 speed heaters
« Reply #1 on: April 08, 2017, 01:32:34 AM »
If this helps I have a 65 Dearborn built Fastback.  Approximate build date is September 2, 1964.  It has lots of early 65 (64 1/2) parts including the heater.  The heater motor is 2 speed, 3 wires, no resistor in heater box.  Switch is center off with low speed to the right and high speed to the left.
65 Dearborn Built Fastback
Approximate Build Date, September 2, 1964
289 4V, C4, PS, PB, No A/C

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7686
Re: 1965 change-over from 2 to 3 speed heaters
« Reply #2 on: April 08, 2017, 11:11:35 AM »
The MPC date is 4/1/65.
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin