« previous next »
Pages: [1]   Go Down

Author Topic: Shock Tower VIN Stamp on '65  (Read 2474 times)

Offline drummingrocks

  • Hero Member
  • *****
  • Posts: 1291
Shock Tower VIN Stamp on '65
« on: November 03, 2016, 10:58:45 AM »
A coworker sent me this video of Detroit Speed's '65 Mustang coupe.  When they showed the engine bay, I was surprised to see that the vin number was visibly stamped on the passenger's side shock tower.  Pretty neat!


Logged
Too much junk, too little time.

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9360
Re: Shock Tower VIN Stamp on '65
« Reply #1 on: November 03, 2016, 11:38:05 AM »
Quote from: drummingrocks on November 03, 2016, 10:58:45 AM
A coworker sent me this video of Detroit Speed's '65 Mustang coupe.  When they showed the engine bay, I was surprised to see that the vin number was visibly stamped on the passenger's side shock tower.  Pretty neat!


I couldn't blow it up to see if it was in fact a Ford vin of proper font etc. or the builders identifacation of some kind.I have not seen a factory stamp there before.
Logged
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24623
Re: Shock Tower VIN Stamp on '65
« Reply #2 on: November 03, 2016, 04:36:21 PM »
Looks homemade. Never seen one applied for any plant on the passenger side shock tower nor do books of the period identify that location as a legal location

Wonder if its legal in that state? - looks like it would cause some real issues if licensed in many states.

« Last Edit: November 03, 2016, 05:16:40 PM by J_Speegle »
Logged
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline NEFaurora

  • Hero Member
  • *****
  • Posts: 970
Re: Shock Tower VIN Stamp on '65
« Reply #3 on: November 04, 2016, 05:20:19 PM »
Some '65 (Early 64 1/2) Pre-Production Allen Park "Test" cars I believe had the VIN#'s stamped on the Driver's side Shock tower in the same spot....but I've never seen one on a passenger side shock tower. That would be new.  Would like to see a better pic of the VIN stamping on this one and know what the actual VIN# is - Too hard to tell..  5F07C177309 ? - If that's the actual VIN#, then I'd have to agree with Jeff as this being homemade...but I'd still like to see a much closer, better pic since it has peaked my curiosity..

:o)

Tony K.
« Last Edit: November 04, 2016, 05:25:49 PM by NEFaurora »
Logged
Tony Kovar (NEFaurora@aol.com)
1965 Mustang Convertible 200 cid 3spd manual
1966 Mustang Convertible Sprint 200 C4 Auto
2007 Mustang Convertible V6 Auto with "Pony Package".
1966 Mustang Sprint 200 Registry Owner/Moderator
MCA#70001

Offline Hipo giddyup

  • Hero Member
  • *****
  • Posts: 1207
  • There is no end to doing right. Giddyup!!!
Re: Shock Tower VIN Stamp on '65
« Reply #4 on: November 04, 2016, 05:32:32 PM »
Perhaps this car has been "re-bodied'? Using a title from one car and having the State Police stamp that vin to identify it on the new "body"???? Maybe along the same lines as when folks use a repro "shell" like the Dynacorns.??
Logged
1967 Springtime Yellow Coupe, 289 2v 3spd, Metuchen built, Nov. 17th 66'
1966 Sahara Beige Coupe, 289 2v 3spd, Dearborn built, July 21st 66'
1964 1/2 Pagoda Green Coupe, 260 2v 3spd, Dearborn built, June 30th 64'
1966 GT350 Fastback clone, 289 HiPo, 725cfm Holley, 4spd, SanJose built, Nov 25th 65'

Offline NEFaurora

  • Hero Member
  • *****
  • Posts: 970
Re: Shock Tower VIN Stamp on '65
« Reply #5 on: November 04, 2016, 05:44:46 PM »

I found this REAL one... It's labeled Dearborn Pilot Plant..

Updated: 11/5/2016 - I found some more info on the pic below.  It is from a Dearborn Pre-Production "Prototype" Convertible,  VIN# 5S08F100009   - And Yes, The "S" is correct for the 2nd digit in the VIN#.  Some Dearborn Prototype cars had the "S" 2nd digit in the VIN as well.  I think Bob Fria's book covers this in depth.


See Below:





« Last Edit: November 05, 2016, 08:56:23 PM by NEFaurora »
Logged
Tony Kovar (NEFaurora@aol.com)
1965 Mustang Convertible 200 cid 3spd manual
1966 Mustang Convertible Sprint 200 C4 Auto
2007 Mustang Convertible V6 Auto with "Pony Package".
1966 Mustang Sprint 200 Registry Owner/Moderator
MCA#70001

Offline WT8095

  • Hero Member
  • *****
  • Posts: 941
  • Dave Z.
Re: Shock Tower VIN Stamp on '65
« Reply #6 on: November 05, 2016, 10:51:28 AM »
The video also shows a VIN in the normal location on the LH inner fender. The digit after the engine code looks like a "4" to me.
Logged
Dave Z.

'68 fastback, S-code + C6. Special Paint (Rainbow promotion), DSO 710784. Actual build date 2/7/1968, San Jose.
'69 Cougar convertible, 351W-2V + FMX, Meadowlark Yellow.

Offline C5ZZ

  • Sr. Member
  • ****
  • Posts: 461
Re: Shock Tower VIN Stamp on '65
« Reply #7 on: November 05, 2016, 04:56:15 PM »
I believe the VINs jumped from 399999 to 600000 and no numbers
in between, they were reserved for Mercury's.
Logged
MCA # 00945

65 Fastback, 6 cyl, AT, AC, PS, PB
Rangoon Red/Red Interior

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24623
Re: Shock Tower VIN Stamp on '65
« Reply #8 on: November 05, 2016, 05:20:20 PM »
Might just be shadows and the angle the picture was taken. Most of the other numbers appear to be similar to the other vin on the shock tower.
Logged
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline SamG

  • Newbie
  • *
  • Posts: 18
Re: Shock Tower VIN Stamp on '65
« Reply #9 on: November 05, 2016, 07:04:05 PM »
slightly different view...looks pretty legit to me, other than the location

Logged
Pages: [1]   Go Up
« previous next »