Author Topic: 68 rubber kit location !!  (Read 2759 times)

Offline mhubert89

  • Sr. Member
  • ****
  • Posts: 318
68 rubber kit location !!
« on: July 01, 2016, 06:41:21 PM »
Hi , can someone told me in wich hole the plug from the kit go in the engine bay !? And the 2 plugs for the rear leaf spring front bracket seem to be very too big ?

Thanks
Mustang Fastback 1968
289, 4 speed
Built in Dearborn on April 16th

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7341
Re: 68 rubber kit location !!
« Reply #1 on: July 01, 2016, 08:18:23 PM »
Hi , can someone told me in wich hole the plug from the kit go in the engine bay !? And the 2 plugs for the rear leaf spring front bracket seem to be very too big ?
These are shown on page 26 of the 68 Mustang Body Assembly Manual (page 25 also has some). You need to get a copy.
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline mhubert89

  • Sr. Member
  • ****
  • Posts: 318
Re: 68 rubber kit location !!
« Reply #2 on: July 02, 2016, 02:18:06 PM »
I have a copie but not very easy to see the good hole when you doing these for the first times !
Can someone told me in wich hole go the others plugs ?
Mustang Fastback 1968
289, 4 speed
Built in Dearborn on April 16th

1967 eight barrel

  • Guest
Re: 68 rubber kit location !!
« Reply #3 on: July 03, 2016, 07:14:26 PM »
I hope there isn't an issue with sharing this here. I know you're overseas and coming across literature can be difficult and expensive.

Offline mhubert89

  • Sr. Member
  • ****
  • Posts: 318
Re: 68 rubber kit location !!
« Reply #4 on: July 03, 2016, 08:56:49 PM »
I hope there isn't an issue with sharing this here. I know you're overseas and coming across literature can be difficult and expensive.

Thanks but i already have this books ! Just not sure about certain holes !
Mustang Fastback 1968
289, 4 speed
Built in Dearborn on April 16th

1967 eight barrel

  • Guest
Re: 68 rubber kit location !!
« Reply #5 on: July 04, 2016, 12:21:40 AM »
If you bought a quality plug kit, the plugs have the factory part number that matches the book. Use the part number listed in the book by location.
If you bought a cheap one, there are no part numbers on the plugs, and short of matching them, you're screwed.

                                                                                                                         -Keith

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7341
Re: 68 rubber kit location !!
« Reply #6 on: July 04, 2016, 12:26:23 PM »
If you bought a quality plug kit, the plugs have the factory part number that matches the book. Use the part number listed in the book by location.
If you bought a cheap one, there are no part numbers on the plugs, and short of matching them, you're screwed.

                                                                                                                         -Keith
Thank you.
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline mhubert89

  • Sr. Member
  • ****
  • Posts: 318
Re: 68 rubber kit location !!
« Reply #7 on: July 04, 2016, 07:50:50 PM »
I have the book and i have a good plug kit with number on it. Maybe seen stupid and easy for you because you know mustang a to z but for me the illustration dont make feel at 100 % sure for the plug .  I was looking to someone to said like  oki picture 1 battery tray apron need a plug to the lower right hole .. Just looking for this because just not sure about 4-5 holes. Like the front apron left side , the lower hole its the fuel line but the hole just upstair need a plug ?  I am new with restoration and this is my first mustang just want to make sure to do it right ! Thanks for your times.
Mustang Fastback 1968
289, 4 speed
Built in Dearborn on April 16th

1967 eight barrel

  • Guest
Re: 68 rubber kit location !!
« Reply #8 on: July 04, 2016, 08:11:20 PM »
That wasn't my intention to make you feel stupid. It just seems self-evident to me because of the plug location and part numbers. My plugs are in. Would you like me to take pictures of the engine compartment with them in? Once you get things in like the battery tray, fuel lines and such, it's really not all that confusing.
If a few pictures of mine will help, I'd be glad to take them and post them for you. I haven't got the engine back in. As for the floorboard and and back, it gets much more simple.
                                                                          -Keith

Offline mhubert89

  • Sr. Member
  • ****
  • Posts: 318
Re: 68 rubber kit location !!
« Reply #9 on: July 04, 2016, 08:58:20 PM »
That wasn't my intention to make you feel stupid. It just seems self-evident to me because of the plug location and part numbers. My plugs are in. Would you like me to take pictures of the engine compartment with them in? Once you get things in like the battery tray, fuel lines and such, it's really not all that confusing.
If a few pictures of mine will help, I'd be glad to take them and post them for you. I haven't got the engine back in. As for the floorboard and and back, it gets much more simple.
                                                                          -Keith


Yes please ! Just the engine bay please , i done the others one.
Thanks its very appreciate !
Math
Mustang Fastback 1968
289, 4 speed
Built in Dearborn on April 16th

1967 eight barrel

  • Guest
Re: 68 rubber kit location !!
« Reply #10 on: July 05, 2016, 01:12:58 AM »
I will get it done for you.

                  -Keith