« previous next »
Pages: [1]   Go Down

Author Topic: 67 390 oil pan ID  (Read 987 times)

Offline preaction

  • Hero Member
  • *****
  • Posts: 1330
67 390 oil pan ID
« on: February 17, 2016, 09:32:03 PM »
Are 390 oil pans for 67 to 70 all of the same shape for a mustang ?  I have only found a FOMOCO block stamp and no engineering number. The one I have does not seem to be damaged but it also seems to have many bumps and lines in addition to the clearance made for the frame connector under the pan as installed in the car.
Logged
8F02R218047-  July 18 1968   Dearborn

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24623
Re: 67 390 oil pan ID
« Reply #1 on: February 17, 2016, 10:24:35 PM »
Logged
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline WT8095

  • Hero Member
  • *****
  • Posts: 941
  • Dave Z.
Re: 67 390 oil pan ID
« Reply #2 on: February 18, 2016, 01:33:59 PM »
Quote from: preaction on February 17, 2016, 09:32:03 PM
The one I have does not seem to be damaged but it also seems to have many bumps and lines in addition to the clearance made for the frame connector under the pan as installed in the car.

Can you post a photo? Some of those bumps and lines may be a normal result of the stamping process. It's not unusual for a deep-drawn part to have some wrinkling, and draw marks (parallel scratches) are typical in certain areas.
Logged
Dave Z.

'68 fastback, S-code + C6. Special Paint (Rainbow promotion), DSO 710784. Actual build date 2/7/1968, San Jose.
'69 Cougar convertible, 351W-2V + FMX, Meadowlark Yellow.

Offline preaction

  • Hero Member
  • *****
  • Posts: 1330
Re: 67 390 oil pan ID
« Reply #3 on: February 19, 2016, 12:03:57 AM »
It seems for the most part the sides are flat and the sealing surface is flat also.
Logged
8F02R218047-  July 18 1968   Dearborn
Pages: [1]   Go Up
« previous next »