« previous next »
Pages: [1]   Go Down

Author Topic: C5ZZ-18813-A antenna  (Read 3193 times)

Offline preaction

  • Hero Member
  • *****
  • Posts: 1330
C5ZZ-18813-A antenna
« on: January 27, 2016, 03:34:54 PM »
Is this a assembly line part or a service replacement for a 65 to 68.
Logged
8F02R218047-  July 18 1968   Dearborn

Offline 67gtasanjose

  • Hero Member
  • *****
  • Posts: 5093
  • "Take the MUSTANG PLEDGE"
Re: C5ZZ-18813-A antenna
« Reply #1 on: January 27, 2016, 04:33:46 PM »
Fourth character of the engineering number is a "Z", that spells service replacement.
Logged
Richard Urch

1967 (11/2/66, S.J.) GTA Luxury Coupe, 289-4V w/Thermactor Emissions, C-4, Int./Ext. Decor +many options

2005 (04/05) GT Premium Convertible, Windveil Blue, Parchment Top w/Med. Parchment interior,  Roush Body Appointments

Offline preaction

  • Hero Member
  • *****
  • Posts: 1330
Re: C5ZZ-18813-A antenna
« Reply #2 on: January 27, 2016, 05:53:33 PM »
I seem to have come up with C5AZ-18813-J as an original is that correct ? I didn't realize this number too had the Z in the fourth place.
Logged
8F02R218047-  July 18 1968   Dearborn

Offline 67gtasanjose

  • Hero Member
  • *****
  • Posts: 5093
  • "Take the MUSTANG PLEDGE"
Re: C5ZZ-18813-A antenna
« Reply #3 on: January 27, 2016, 07:38:00 PM »
Quote from: preaction on January 27, 2016, 05:53:33 PM
I seem to have come up with C5AZ-18813-J as an original is that correct ? I didn't realize this number too had the Z in the fourth place.

I don't believe it is any different than the other, except maybe the cable lead.
Going by the decipher guides,  C5= 65, A=Ford generic or full size and again Z=service replacement
Logged
Richard Urch

1967 (11/2/66, S.J.) GTA Luxury Coupe, 289-4V w/Thermactor Emissions, C-4, Int./Ext. Decor +many options

2005 (04/05) GT Premium Convertible, Windveil Blue, Parchment Top w/Med. Parchment interior,  Roush Body Appointments

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24628
Re: C5ZZ-18813-A antenna
« Reply #4 on: January 27, 2016, 10:08:08 PM »
67-68 are different from the 65-66 I believe

Should be a thread or two if I recall correctly
Logged
Jeff Speegle

Anything worth doing is worth doing concours ;)

Online 196667Bob

  • Hero Member
  • *****
  • Posts: 1054
Re: C5ZZ-18813-A antenna
« Reply #5 on: January 27, 2016, 10:09:34 PM »
The C5AZ-18813-J Antennae is a rear quarter mount antennae, catalogued in 1966 as RH and LH, and sold together in two boxes. The two antennae are identical, but the instructions note that only one need be hooked up to the radio.
I've attached a few pictures, for your "Viewing" as opposed to "Listening" pleasure.

Bob
Logged
1966 Coupe, C Code, 3 Sp MT, 6T07C154XXX, Build Date 11/22/65
1967 Conv, C Code, C4, 7F03C154XXX, Actual Build Date 01/31/67
MCA 04909

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9362
Re: C5ZZ-18813-A antenna
« Reply #6 on: January 27, 2016, 10:13:56 PM »
Quote from: preaction on January 27, 2016, 03:34:54 PM
Is this a assembly line part or a service replacement for a 65 to 68.
you have to look at physical characteristics because two types were bagged or boxed using those numbers.That is if you want a historical correct looking  assemblyline /dealer installed version.
Logged
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Online 196667Bob

  • Hero Member
  • *****
  • Posts: 1054
Re: C5ZZ-18813-A antenna
« Reply #7 on: January 27, 2016, 10:24:21 PM »
+1 on 1967-68 being different. They carried Service Part No. C7ZZ-18813-A.

Bob
Logged
1966 Coupe, C Code, 3 Sp MT, 6T07C154XXX, Build Date 11/22/65
1967 Conv, C Code, C4, 7F03C154XXX, Actual Build Date 01/31/67
MCA 04909

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9362
Re: C5ZZ-18813-A antenna
« Reply #8 on: January 27, 2016, 10:32:22 PM »
Quote from: 196667Bob on January 27, 2016, 10:24:21 PM
+1 on 1967-68 being different. They carried Service Part No. C7ZZ-18813-A.

Bob
FYI you can find the correct looking 67/68 antenna sometimes in the C5 marked paper bags . That is why you have to give it a visual once over to confirm.
Logged
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Online 196667Bob

  • Hero Member
  • *****
  • Posts: 1054
Re: C5ZZ-18813-A antenna
« Reply #9 on: January 27, 2016, 10:36:42 PM »
+1 on the visual.
Bob
Logged
1966 Coupe, C Code, 3 Sp MT, 6T07C154XXX, Build Date 11/22/65
1967 Conv, C Code, C4, 7F03C154XXX, Actual Build Date 01/31/67
MCA 04909

Offline preaction

  • Hero Member
  • *****
  • Posts: 1330
Re: C5ZZ-18813-A antenna
« Reply #10 on: January 28, 2016, 04:16:55 PM »
On an original is the mast pressed on to the base so as to be able to be pulled off, being assembled as a press fit I guess you would call it. I remember other threads about this but my search came up empty. Would COAZ-18A886-B be correct for a mast only replacement ?
« Last Edit: January 28, 2016, 04:39:49 PM by preaction »
Logged
8F02R218047-  July 18 1968   Dearborn

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9362
Re: C5ZZ-18813-A antenna
« Reply #11 on: January 28, 2016, 08:04:40 PM »
Quote from: preaction on January 28, 2016, 04:16:55 PM
On an original is the mast pressed on to the base so as to be able to be pulled off, being assembled as a press fit I guess you would call it. I remember other threads about this but my search came up empty. Would COAZ-18A886-B be correct for a mast only replacement ?
the only thing I have been successful in changing was the press fit ball.
Logged
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby
Pages: [1]   Go Up
« previous next »