Author Topic: restoring hubcaps?  (Read 1899 times)

Offline tvor

  • Full Member
  • ***
  • Posts: 108
restoring hubcaps?
« on: November 18, 2015, 11:34:49 AM »
Has anyone tried to restore the paint on the spinner hubcaps?  I have a couple where some of the black has flaked off.
'65 Coupe, built in San Jose.
289 CID with C4 trans.
Door plate date of 9/11/64
Original owner - mom
Second owner - me!

Offline drummingrocks

  • Hero Member
  • *****
  • Posts: 1291
Re: restoring hubcaps?
« Reply #1 on: November 18, 2015, 12:07:08 PM »
I've restored 2 out of 4 spinner hubcaps on my '66.  Lots of tedious taping and masking.  And believe me, a '66 hubcap looks like taping it up would be a breeze compared to a '65.  I don't know how you'd do a '65 hubcap without some sort of mask.  It would take forever to try and mask it by hand.
Too much junk, too little time.

Offline tvor

  • Full Member
  • ***
  • Posts: 108
Re: restoring hubcaps?
« Reply #2 on: November 18, 2015, 12:51:27 PM »
I agree!  The idea of masking every line is a nightmare.  I was even thinking about having a vinyl decal cut for each section to use as a mask, but I'm still leery of taking on this project.
 
Do you happen to know what the color is?  Mine look like a charcoal color, but I assume it was originally the camera case black.  If I do shoot it, I'll probably go with rustoleum semigloss or satin rather than using a rattle can
'65 Coupe, built in San Jose.
289 CID with C4 trans.
Door plate date of 9/11/64
Original owner - mom
Second owner - me!

Offline drummingrocks

  • Hero Member
  • *****
  • Posts: 1291
Re: restoring hubcaps?
« Reply #3 on: November 18, 2015, 02:48:09 PM »
Sorry, I don't know the exact color.  I know for a '66 it's Light Argent and Dark Argent.  I agree that it does look like black on the '65 hubcaps I've seen.  That's not a bad idea about having a decal cut.  I'm surprised no one has come up with one yet.
Too much junk, too little time.

Offline Dino1

  • Newbie
  • *
  • Posts: 9
Re: restoring hubcaps?
« Reply #4 on: November 19, 2015, 10:54:51 AM »
I have one NOS hubcap I would sell, and a few nice OEM's as well.
None of them have the spinners, but that is an easy swap.
I also have some 64.5 as well. The color on those are different, more flat.

Offline Smokey 15

  • Sr. Member
  • ****
  • Posts: 444
Re: restoring hubcaps?
« Reply #5 on: November 19, 2015, 01:04:48 PM »
 If you decide to take the time to do this, I'd advise buying striper's tape. It will make curves more easily than masking tape and leaves a clean line when removed.

Offline carlite65

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2411
Re: restoring hubcaps?
« Reply #6 on: November 19, 2015, 01:40:31 PM »
if you look closely at original hubcaps you will not see crisp painted lines. the edges are slightly fuzzy indicating some type of mask was used. agree that one should be reproduced.
5F09C331248

Offline tvor

  • Full Member
  • ***
  • Posts: 108
Re: restoring hubcaps?
« Reply #7 on: November 20, 2015, 10:52:45 PM »
I have one NOS hubcap I would sell, and a few nice OEM's as well.
None of them have the spinners, but that is an easy swap.
I also have some 64.5 as well. The color on those are different, more flat.

Thank you for the offer, but fortunately, I have my originals that are in decent shape, just that some of the paint is worn off in areas
'65 Coupe, built in San Jose.
289 CID with C4 trans.
Door plate date of 9/11/64
Original owner - mom
Second owner - me!