« previous next »
Pages: [1]   Go Down

Author Topic: Decoding a Power Steering Tag  (Read 4369 times)

Offline ddonzella

  • Full Member
  • ***
  • Posts: 167
Decoding a Power Steering Tag
« on: September 27, 2015, 12:49:00 AM »
Can someone decode my power steering tag?  I know it says the pump is black but don't know if it belongs on my 69 Dearborn Shelby GT 350.

The Tag reads HBA  BK
                      2   W    14     9
Logged

Offline WT8095

  • Hero Member
  • *****
  • Posts: 941
  • Dave Z.
Re: Decoding a Power Steering Tag
« Reply #1 on: September 27, 2015, 11:11:24 AM »
The '75 MPCs (both Ford and L-M) show several uses for the BK pump, but not on Mustangs.
Logged
Dave Z.

'68 fastback, S-code + C6. Special Paint (Rainbow promotion), DSO 710784. Actual build date 2/7/1968, San Jose.
'69 Cougar convertible, 351W-2V + FMX, Meadowlark Yellow.

Offline 67gtasanjose

  • Hero Member
  • *****
  • Posts: 5093
  • "Take the MUSTANG PLEDGE"
Re: Decoding a Power Steering Tag
« Reply #2 on: September 27, 2015, 01:39:43 PM »
Quote from: WT8095 on September 27, 2015, 11:11:24 AM
The '75 MPCs (both Ford and L-M) show several uses for the BK pump, but not on Mustangs.



+1

"BK" does not indicate "black" in this usage.

Another source to confirm:

http://www.stangerssite.com/FP_IDchart.html
Logged
Richard Urch

1967 (11/2/66, S.J.) GTA Luxury Coupe, 289-4V w/Thermactor Emissions, C-4, Int./Ext. Decor +many options

2005 (04/05) GT Premium Convertible, Windveil Blue, Parchment Top w/Med. Parchment interior,  Roush Body Appointments

Offline ddonzella

  • Full Member
  • ***
  • Posts: 167
Re: Decoding a Power Steering Tag
« Reply #3 on: September 27, 2015, 06:21:23 PM »
Yes,  I know. It has a w for the make which in turn indicates the color.
Logged

Offline ddonzella

  • Full Member
  • ***
  • Posts: 167
Re: Decoding a Power Steering Tag
« Reply #4 on: September 27, 2015, 06:27:24 PM »
Does anyone have a pic of the back of a 69 Shelby GT 350 correct steering pump?
Logged

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9362
Re: Decoding a Power Steering Tag
« Reply #5 on: September 27, 2015, 07:13:50 PM »
Quote from: ddonzella on September 27, 2015, 06:21:23 PM
Yes,  I know. It has a w for the make which in turn indicates the color.
+1 . W is short for TRW which was one of two MFG's to supply to SJ plant. TRW were painted black which was a identifying factor outlined in the Ford TSB on the subject.
Logged
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9362
Re: Decoding a Power Steering Tag
« Reply #6 on: September 27, 2015, 07:21:08 PM »
Quote from: ddonzella on September 27, 2015, 06:27:24 PM
Does anyone have a pic of the back of a 69 Shelby GT 350 correct steering pump?
Unlike 67/68 Shelby truck sourced pump, the return nipple is at a 45 degree angle pointed down on the 69/70 just like the regular Mustang.The Pump is no different then the regular Mustang application .In your case a 69/70 "M" code application.
Logged
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline WT8095

  • Hero Member
  • *****
  • Posts: 941
  • Dave Z.
Re: Decoding a Power Steering Tag
« Reply #7 on: September 27, 2015, 07:32:20 PM »
Quote from: ddonzella on September 27, 2015, 06:27:24 PM
Does anyone have a pic of the back of a 69 Shelby GT 350 correct steering pump?

Mustangtek has photos:

http://www.mustangtek.com/steering/HBA-BF.html
Logged
Dave Z.

'68 fastback, S-code + C6. Special Paint (Rainbow promotion), DSO 710784. Actual build date 2/7/1968, San Jose.
'69 Cougar convertible, 351W-2V + FMX, Meadowlark Yellow.

Offline ddonzella

  • Full Member
  • ***
  • Posts: 167
Re: Decoding a Power Steering Tag
« Reply #8 on: September 27, 2015, 07:57:12 PM »
ok,

The one on my car presently has a 90 degree elbow for the return line. That is the difference ( along with the wrong tag)
Logged

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9362
Re: Decoding a Power Steering Tag
« Reply #9 on: September 27, 2015, 09:00:53 PM »
Quote from: ddonzella on September 27, 2015, 07:57:12 PM
ok,

The one on my car presently has a 90 degree elbow for the return line. That is the difference ( along with the wrong tag)
They will all function the same regardless of the tag on the back.  Typically they get switched with a rebuilt  replacement from the auto parts store . It happens all the time .
Logged
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9362
Re: Decoding a Power Steering Tag
« Reply #10 on: September 27, 2015, 09:10:49 PM »
Only way to maintain the tag and the correct can (reservoir ) at rebuild time is to get a rebuilt pump assembly (insides) and get a new O ring and seal the original can up the pump along with the original tag.
Logged
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24628
Re: Decoding a Power Steering Tag
« Reply #11 on: October 07, 2015, 02:35:40 PM »
Quote from: ddonzella on September 27, 2015, 06:27:24 PM
Does anyone have a pic of the back of a 69 Shelby GT 350 correct steering pump?

Sorry - just relocated the thread. Picture has been posted in another thread

Logged
Jeff Speegle

Anything worth doing is worth doing concours ;)
Pages: [1]   Go Up
« previous next »