Author Topic: Parts ID ?  (Read 2350 times)

Offline Brian Conway

  • Hero Member
  • *****
  • Posts: 1623
Parts ID ?
« on: May 02, 2015, 10:28:41 PM »
     Have some parts here I need a little help with;   is this wheel cover a mustang part ?  It is a 14".  Have a distributor C5AF 12127-N 5EC.  I am not familiar with that date stamp ?  OE radiator ?  on the tank top W-MO 1 65 and C4ZE Z2.  No stamping on the straps.  Thanks Brian
5RO9A GT  4 Spd Built 5/29/65
9TO2R SCJ 4 Spd Built 9/19/68
Owner Driver Mechanic
San Diego, Ca.

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7344
Re: Parts ID ?
« Reply #1 on: May 03, 2015, 12:25:36 AM »
It looks like the wheel cover is C3OZ-1130-K for a 65 Falcon.
The distributor is a standard 289 2V used on almost every Ford with a C4 in 1965 and 66 (except smog). The date code is 1965 May third week.
If the top straps have a round end, it's a San Jose Moline radiator, made January 1965. A picture would help.
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7685
Re: Parts ID ?
« Reply #2 on: May 03, 2015, 02:33:02 AM »
The wheel cover was available as an option for most Ford's around 1964-65, most common on the earlier cars.  They're a much nicer looking wire cover than the later blue center.
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline NEFaurora

  • Hero Member
  • *****
  • Posts: 970
Re: Parts ID ?
« Reply #3 on: May 03, 2015, 08:20:14 AM »

"They're a much nicer looking wire cover than the later blue center."

Funny, I happen to like the later Blue Center ones better..  I think the Earlier Falcon Wire Wheel  cap looks too "clutterred" and too busy looking.  It's a matter of opinion I guess.

Here's a nice comparison between the '64 1/2 Falcon Wire Wheel cap next to a '64 1/2 Mustang Cap....Though they were both used on the '64 1/2 Mustang.  The '64 1/2 Mustang Cap later had the heavier bigger Spinner replaced with the smaller Blue one for regular '65-'66 Production.




:o)

Tony K.

Tony Kovar (NEFaurora@aol.com)
1965 Mustang Convertible 200 cid 3spd manual
1966 Mustang Convertible Sprint 200 C4 Auto
2007 Mustang Convertible V6 Auto with "Pony Package".
1966 Mustang Sprint 200 Registry Owner/Moderator
MCA#70001

Offline Brian Conway

  • Hero Member
  • *****
  • Posts: 1623
Re: Parts ID ?
« Reply #4 on: May 03, 2015, 10:45:43 AM »
     Thanks for the help.  The radiator has the rounded top straps.   Does the  ' Z 2 ' stamping have any meaning ?  The wheel covers were an option and used on early Mustangs.  The distributor is nothing of note other than an OE unit.  Brian
5RO9A GT  4 Spd Built 5/29/65
9TO2R SCJ 4 Spd Built 9/19/68
Owner Driver Mechanic
San Diego, Ca.

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7344
Re: Parts ID ?
« Reply #5 on: May 03, 2015, 04:07:58 PM »
The radiator is a San Jose Moline made, I think the "Z" means Mustang. The "2" I don't know.
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline ChrisV289

  • Hero Member
  • *****
  • Posts: 1965
Re: Parts ID ?
« Reply #6 on: May 03, 2015, 04:30:59 PM »
Automatic transmission perhaps for Z2
Chris
1965 Honey Gold Fastback (SJ 10/29/64)
1965 Caspian Blue Fastback (SJ 06/03/65)
2009 V6 Mustang Coupe

Offline Brian Conway

  • Hero Member
  • *****
  • Posts: 1623
Re: Parts ID ?
« Reply #7 on: May 03, 2015, 07:18:04 PM »
Got another one to look at.  Battery ground cable and I can't seem to find any info on it.  I realize the picture title says FOR SALE.  Not the case that is just where I file these pictures.  Thanks,  Brian
« Last Edit: May 03, 2015, 07:20:22 PM by Brian Conway »
5RO9A GT  4 Spd Built 5/29/65
9TO2R SCJ 4 Spd Built 9/19/68
Owner Driver Mechanic
San Diego, Ca.

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7685
Re: Parts ID ?
« Reply #8 on: May 03, 2015, 10:04:33 PM »
The Z2 radiator is for a V8 automatic application.
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin