« previous next »
Pages: 1 [2]   Go Down

Author Topic: Help Determining Build Date  (Read 8185 times)

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24627
Re: Help Determining Build Date
« Reply #15 on: January 27, 2015, 02:42:55 PM »
Wish Jim and Jim had done an electronic version but that was a bit beyond their scope at the time. My autographed copy is looking pretty sad - always told J Smart I should have gotten one for the shelf and one for the heavy use it has seen through the years
« Last Edit: January 27, 2015, 02:56:54 PM by J_Speegle »
Logged
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline drummingrocks

  • Hero Member
  • *****
  • Posts: 1291
Re: Help Determining Build Date
« Reply #16 on: January 27, 2015, 03:42:36 PM »
Quote from: J_Speegle on January 27, 2015, 02:42:55 PM
Wish Jim and Jim had done an electronic version but that was a bit beyond their scope at the time.

+1, that would be so useful to have something like a searchable PDF.  Kind of like how most of the Osborne manuals are now available on CD.
Logged
Too much junk, too little time.

priceless

  • Guest
Re: Help Determining Build Date
« Reply #17 on: January 27, 2015, 07:07:29 PM »
Quote from: drummingrocks on January 27, 2015, 11:26:42 AM
If you find one, hook me up, I need one too...but not at $499!!!   :o  :D
I hear ya, Bro 8)
Logged

Offline midlife

  • Wiring Guru---let me check your shorts!
  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2175
    • Midlife Harness Restorations
Re: Help Determining Build Date
« Reply #18 on: January 27, 2015, 09:29:34 PM »
Geez, I have a copy sitting next to my computer in the garage...willing to listen to any outrageous offers...hint hint...
Logged
Midlife Harness Restorations - http://midlifeharness.com

priceless

  • Guest
Re: Help Determining Build Date
« Reply #19 on: January 28, 2015, 07:18:38 PM »
Vol. 2 on eBay. Someone asking $95.  Glad I have one, cause I couldn't even see giving $95 for it....Just me.

http://www.ebay.com/itm/181635472776?_trksid=p2055119.m1438.l2648&ssPageName=STRK%3AMEBIDX%3AIT
Logged

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7346
Re: Help Determining Build Date
« Reply #20 on: January 28, 2015, 08:25:50 PM »
Quote from: priceless on January 28, 2015, 07:18:38 PM
Vol. 2 on eBay. Someone asking $95.  Glad I have one, cause I couldn't even see giving $95 for it....Just me.

http://www.ebay.com/itm/181635472776?_trksid=p2055119.m1438.l2648&ssPageName=STRK%3AMEBIDX%3AIT
This is not unusual. I've seen $80 to $100 asked for Vol. 2. It's Vol. 1 that's expensive because it's the best data source for 64-66 Mustangs.
Jim
Logged
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline drummingrocks

  • Hero Member
  • *****
  • Posts: 1291
Re: Help Determining Build Date
« Reply #21 on: January 29, 2015, 02:45:36 PM »
As an alternative, since Vol. 1 of Mustang Production Guide seems to hard to get ahold of, Kevin Marti's Mustang by the Numbers  will get you at least in the ballpark when estimating a build date.
Logged
Too much junk, too little time.

Offline midlife

  • Wiring Guru---let me check your shorts!
  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2175
    • Midlife Harness Restorations
Re: Help Determining Build Date
« Reply #22 on: January 29, 2015, 09:33:40 PM »
Quote from: drummingrocks on January 29, 2015, 02:45:36 PM
As an alternative, since Vol. 1 of Mustang Production Guide seems to hard to get ahold of, Kevin Marti's Mustang by the Numbers  will get you at least in the ballpark when estimating a build date.
Are you sure about that?  I didn't see anything detailing VIN dates in that book, which covers only 67-73.
Logged
Midlife Harness Restorations - http://midlifeharness.com

Offline drummingrocks

  • Hero Member
  • *****
  • Posts: 1291
Re: Help Determining Build Date
« Reply #23 on: January 30, 2015, 12:53:00 PM »
Quote from: midlife on January 29, 2015, 09:33:40 PM
Are you sure about that?  I didn't see anything detailing VIN dates in that book, which covers only 67-73.

I might be wrong, I am going off of memory.  I'll check again when I get home.  It was one of Marti's books, definitely.
Logged
Too much junk, too little time.

priceless

  • Guest
Re: Help Determining Build Date
« Reply #24 on: January 30, 2015, 04:34:05 PM »
Quote from: jwc66k on January 28, 2015, 08:25:50 PM
...............because it's the best data source for 64-66 Mustangs..........
Jim
I can see that, since there's no Marti reports.
Logged

Offline drummingrocks

  • Hero Member
  • *****
  • Posts: 1291
Re: Help Determining Build Date
« Reply #25 on: January 30, 2015, 05:41:58 PM »
Quote from: midlife on January 29, 2015, 09:33:40 PM
Are you sure about that?  I didn't see anything detailing VIN dates in that book, which covers only 67-73.

It was actually Marti's Mustang and Cougar Tag Book.  It has date code approximations broken down by model year.  Again, it'll at least get you somewhat in the ballpark if the original data plate is missing.
Logged
Too much junk, too little time.
Pages: 1 [2]   Go Up
« previous next »