Author Topic: New Group Project - 69-70 Torque Tables  (Read 1817 times)

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24526
New Group Project - 69-70 Torque Tables
« on: November 09, 2013, 07:56:14 PM »
Though not specifically "Concours" we all find our self at times needing quick access to the suggested factory torque readings for the more typical car building components. So I thought it would be a good project to put together a group (for ever year or two) of these handy/quick guides in the library.

To that end I don't have access to every year and volume of these. I also thought  many of you would like to help out so here is the request

If you have access to a 69 and or a 70 Shop Manual please look up the following fill in the needed info. Please specify if your listing 65 or 66 ratings and if including engine torque ratings engine size since a 6 cylinder will be different from a V8 for example. Some of the following items will not apply - just ignore them - its a generic list for across the classic period ;)

Thanks for the help - once collected I'll assemble and post for the benefit of all members


ENGINE - type -
Ignition timing -
Mains - cap bolts -
Mains - Outer cap bolts -

Rods nuts -
Head bolts -
Rocker arm nuts (if positive stop) -
Valve cover bolts -
Intake bolts - Cast steel -
Intake bolts  - Cast aluminum -
Harmonic balancer -
Windage tray bolts -
Oil Pump body to block bolts -
Oil pan/Steel mounting bolts -

Oil filter adapter -
Cam Thrust plate bolts -
Cam sprocket to cam bolt -
Timing cover bolts -
Waterpump bolts -
Thermostat housing bolts -
Fuel pump to engine bolts -
Exhaust manifold bolts -
Spark plugs -
Crankshaft pulley to balancer bolts -
Fan and water pump pulley bolts -
Flywheel bolts - Manual trans -
Flexplate bolts  -Automatic trans -
Pressure plate to flywheel bolts -
Bellhousing to engine bolts -
Trans bolts - Top Loader top cover -
Trans bolts - Side case manual cover -
Converter to flexplate nuts -
Engine mounts/insulators to block bolts -
Starter motor bolts - Aluminum bellhousing -
Starter motor bolts - Cast steel bellhousing -

SUSPENSION
Strut rod to frame nuts -
Strut rod to A-arm nuts & bolts -
Idler to body/frame nuts & bolts -
Idler nut to center link -
Tie rod nuts - Inner & outer -
Ball joint nuts - Upper and lower -
Center link to pittman arm nut -
Pittman arm to steering shaft nut -
Lower A-arm to body nuts & bolts -
Coil spring saddle to Upper A-arm nuts -
Upper A-arm to body nuts -


Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline Brian Conway

  • Hero Member
  • *****
  • Posts: 1623
Re: New Group Project - 69-70 Torque Tables
« Reply #1 on: November 09, 2013, 11:08:24 PM »
Straight out of the Ford Shop Manual.  Brian
5RO9A GT  4 Spd Built 5/29/65
9TO2R SCJ 4 Spd Built 9/19/68
Owner Driver Mechanic
San Diego, Ca.

Offline Brian Conway

  • Hero Member
  • *****
  • Posts: 1623
Re: New Group Project - 69-70 Torque Tables
« Reply #2 on: November 10, 2013, 03:29:43 PM »
The timing Spec's.  Brian
5RO9A GT  4 Spd Built 5/29/65
9TO2R SCJ 4 Spd Built 9/19/68
Owner Driver Mechanic
San Diego, Ca.

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24526
Re: New Group Project - 69-70 Torque Tables
« Reply #3 on: November 10, 2013, 06:45:23 PM »
The timing Spec's.  Brian

Thanks Brian that takes care of the 69 engine needs - Think I've got access to the 70 engine and suspension ones so that only leaves the 69 Suspension for this set of years
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline Brian Conway

  • Hero Member
  • *****
  • Posts: 1623
Re: New Group Project - 69-70 Torque Tables
« Reply #4 on: November 10, 2013, 07:28:00 PM »
Quite an under taking Jeff.  Good Luck with all this stuff.  Straight out of the book w/pg. numbers.  Brian
5RO9A GT  4 Spd Built 5/29/65
9TO2R SCJ 4 Spd Built 9/19/68
Owner Driver Mechanic
San Diego, Ca.

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24526
Re: New Group Project - 69-70 Torque Tables
« Reply #5 on: November 11, 2013, 11:11:57 PM »
Thanks - now have all of the 69-70 needs
Jeff Speegle

Anything worth doing is worth doing concours ;)