Author Topic: Help needed on ID various engine parts on a Hi-Po 289  (Read 2540 times)

Offline silverfox

  • Newbie
  • *
  • Posts: 24
Help needed on ID various engine parts on a Hi-Po 289
« on: July 05, 2013, 08:13:53 PM »

Hi everyone.

I'm in the process of taking out a Hi-Po 289 out of my '66 GT350 clone and I could do with some assistance because the Hi-Po motor in the car appears to have a mix of Hi-Po non-correct and correct parts.

Help needed to verify the oil pan, oil cooler, fuel pump and fan.
Many thanks
Chris


Oil pan - Genuine cobra unit (I think it may be genuine?)



Oil Cooler



Fuel pump


Fan 
It seems that this is from a 429 engine ?? (see link below)
http://books.google.co.uk/books?id=MFrxUXmxQuwC&pg=PA46&lpg=PA46&dq=c9ze-d+fan&source=bl&ots=ycAGuH-jOc&sig=iUysFdQEgGIr3N8BfpFHiKeGzvQ&hl=en&sa=X&ei=mk_XUenzHaSM7Ab8tYHgDw&ved=0CGIQ6AEwBg#v=onepage&q=c9ze-d%20fan&f=false


Current Mustangs:
1965 Fastback 289 K Code - Hi-Po - Caspian Blue

1970 Mach 1 Sportsroof 351C Auto - White - Project car and in Resto (started Sept 2012)

Past Mustangs:
1966 Fastback GT350 clone, Hi-Po 289, 4 Spd Man, White/Blue

Offline tim_morrison82

  • Sr. Member
  • ****
  • Posts: 280
    • Click Here for My Project
Re: Help needed on ID various engine parts on a Hi-Po 289
« Reply #1 on: July 05, 2013, 11:49:10 PM »
I cant really help with specific parts, but bob mannels ford small block book would definately help you! its a bible for engine parts id.
San Jose built (Mid Dec 67) Non GT J code Coupe.
Wimbledon White with Parchment Bench seat,
Visibility Group, Power Steering, Power Disc Brakes, Selectaire Conditioner, AM radio, Heavy Duty suspension, Deluxe Belts, Deluxe Wheel Covers, 3.00:1 rear.

Unique 1 of 1 car. Just like every other car...

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24628
Re: Help needed on ID various engine parts on a Hi-Po 289
« Reply #2 on: July 07, 2013, 11:43:56 PM »
Difficult to tell the COBRA oil pan over the internet - often comes down to weighing it and comparing that measurement to originals. Many repo have no additional markings

Oil filter holder is an after market unit

Fuel filter is an over the counter pump - might be a carter but does not have the normal markings but not original to a Hipo

Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline silverfox

  • Newbie
  • *
  • Posts: 24
Re: Help needed on ID various engine parts on a Hi-Po 289
« Reply #3 on: July 08, 2013, 04:00:25 PM »
I cant really help with specific parts, but bob mannels ford small block book would definately help you! its a bible for engine parts id.

Difficult to tell the COBRA oil pan over the internet - often comes down to weighing it and comparing that measurement to originals. Many repo have no additional markings

Oil filter holder is an after market unit

Fuel filter is an over the counter pump - might be a carter but does not have the normal markings but not original to a Hipo

Thanks for taking the time to look and post guys.

Jeff, on the oil pan, it will be coming off in the next week or so, anything in particular I should look for ?

Chris
Current Mustangs:
1965 Fastback 289 K Code - Hi-Po - Caspian Blue

1970 Mach 1 Sportsroof 351C Auto - White - Project car and in Resto (started Sept 2012)

Past Mustangs:
1966 Fastback GT350 clone, Hi-Po 289, 4 Spd Man, White/Blue

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24628
Re: Help needed on ID various engine parts on a Hi-Po 289
« Reply #4 on: July 08, 2013, 11:10:49 PM »
Thanks for taking the time to look and post guys.

Jeff, on the oil pan, it will be coming off in the next week or so, anything in particular I should look for ?

Chris


A little reading  here might answer some of your questions

http://saacforum.com/index.php?topic=13054.15
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline silverfox

  • Newbie
  • *
  • Posts: 24
Re: Help needed on ID various engine parts on a Hi-Po 289
« Reply #5 on: July 09, 2013, 06:20:35 PM »

A little reading  here might answer some of your questions

http://saacforum.com/index.php?topic=13054.15

Jeff,
Thanks, that's very, very helpful.
regards
Chris
Current Mustangs:
1965 Fastback 289 K Code - Hi-Po - Caspian Blue

1970 Mach 1 Sportsroof 351C Auto - White - Project car and in Resto (started Sept 2012)

Past Mustangs:
1966 Fastback GT350 clone, Hi-Po 289, 4 Spd Man, White/Blue