Author Topic: Trunk fuel sending wire, attachment  (Read 2401 times)

priceless

  • Guest
Trunk fuel sending wire, attachment
« on: January 17, 2013, 12:10:38 PM »
I need a photo of the trunk fuel sending wire where it attaches to the L.S. trunk seam OR, a good description of its location. I was in Pensecola FL last March and I had a point deducted for not having a "zip tie" attaching the wire to the left trunk seam where the trunk seam protector is located.

What color is the zip tie(white,black?) and the exact location. Any help would be appreciated.

Feb. 24,'69 build date,Metuchen,NJ, '69 Mach1.

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24627
Re: Trunk fuel sending wire, attachment
« Reply #1 on: January 20, 2013, 10:56:56 PM »
Opaque ("white") nylon zip tie (about 6 1/2" long)  Normally inserted from the passenger side of the hole, around capturing the wires than through the lock . The end aims towards the passenger side and is untrimmed

What I've always found




Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9362
Re: Trunk fuel sending wire, attachment
« Reply #2 on: January 21, 2013, 03:49:10 AM »
Pan Duit was the MFG. AMK sells them . The electrical supply looks close for most purposes.
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

priceless

  • Guest
Re: Trunk fuel sending wire, attachment
« Reply #3 on: January 21, 2013, 08:43:01 AM »
So, the "zip tie" hold both the eletrical wires and the fuel sending wire?  And also, after installation, it looks like,by viewing the photos,the zip tie isn't clipped, its left long? Thanks for any responses.

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24627
Re: Trunk fuel sending wire, attachment
« Reply #4 on: January 21, 2013, 02:45:05 PM »
So, the "zip tie" hold both the eletrical wires and the fuel sending wire? 

Yes


And also, after installation, it looks like,by viewing the photos,the zip tie isn't clipped, its left long? Thanks for any responses.


Opaque ("white") nylon zip tie (about 6 1/2" long)  Normally inserted from the passenger side of the hole, around capturing the wires than through the lock . The end aims towards the passenger side and is untrimmed
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline Brian Conway

  • Hero Member
  • *****
  • Posts: 1623
Re: Trunk fuel sending wire, attachment
« Reply #5 on: January 21, 2013, 05:49:34 PM »
Couple more shots of the same area.  Brian
5RO9A GT  4 Spd Built 5/29/65
9TO2R SCJ 4 Spd Built 9/19/68
Owner Driver Mechanic
San Diego, Ca.

Offline app01

  • Full Member
  • ***
  • Posts: 186
    • Make Your Car Stand Out with A Custom Showboard from
Re: Trunk fuel sending wire, attachment
« Reply #6 on: January 21, 2013, 06:04:30 PM »
Also dead nuts has them and there is no minimum order there.

http://www.deadnutson.com/catalog/item/4065497/4972957.htm

Also click on the link and there is another unrestored example picture.
http://www.deadnutson.com/albums/album_image/4236615/1472519.htm
Currently own:
1970 Boss 302 - Yellow- May 1970, Dearborn
1970 Mach 1 -Sept 1969, Metuchen
1962 Corvette 340hp

Previously Owned:
1967 Mustang Convertible (My 1st car)
1970 Mach 1 (my 2nd car)
1989 GT
1969 Mach 1 (<29k miles, Unrestored, MCA Gold)-sold in 2012

MCA #62598

www.PalmieriConcepts.com

Offline drummingrocks

  • Hero Member
  • *****
  • Posts: 1291
Re: Trunk fuel sending wire, attachment
« Reply #7 on: January 21, 2013, 06:18:16 PM »
PM sent.
Too much junk, too little time.

priceless

  • Guest
Re: Trunk fuel sending wire, attachment
« Reply #8 on: January 21, 2013, 07:50:45 PM »
Thanks to all you guys for the replies and pics. Helps out Tremendously!!!

Brett, I sent you a PM back and Thanks very much in advance.