Author Topic: 65/66 Cruise Control??  (Read 3512 times)

Offline bryancobb

  • Silver Level Subscriber
  • Hero Member
  • ****
  • Posts: 1077
  • 2009 Ridn' Around
65/66 Cruise Control??
« on: September 29, 2011, 06:16:48 AM »
http://cgi.ebay.com/ebaymotors/64-65-66-NOS-Mercury-Mustang-Ford-Throttle-Control-Before-Cruise-Control-/370546680197?pt=Motors_Car_Truck_Parts_Accessories&hash=item56464da185

Anybody know abut this thing.  Back in the early 80's when I was driving my Nightmist 66 Convertible back-n-forth from Seymour Johnson Air Force Base, in NC, to Georgia, 6 or 8 times per year, I used to wedge my sneaker between the pedal and the tunnel to be a "cruise control."

If this is thing is what I think it is, I would have really appreciated having one.
66 Metuch Conv
Nightmist, Std Blu Int
6T08C223904    76A       K         22       15c     21      6        6
                      BODY  COLOR   TRIM    DATE   DSO   AXLE  XMSN
   C/O  785                                   (rotation #)
   16    C14   6T08C223904        (weld bay 16, bucked MAR 14)

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7687
Re: 65/66 Cruise Control??
« Reply #1 on: September 29, 2011, 08:19:31 AM »
It was a generic dealer option.  Don't recall ever seeing one installed on a Mustang with original paperwork to show it was there when new.
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline drummingrocks

  • Hero Member
  • *****
  • Posts: 1291
Re: 65/66 Cruise Control??
« Reply #2 on: September 29, 2011, 10:38:45 AM »
How does that even install/operate?  It's hard to tell from the picture provided what it's exactly intended to do.
Too much junk, too little time.

Offline bryancobb

  • Silver Level Subscriber
  • Hero Member
  • ****
  • Posts: 1077
  • 2009 Ridn' Around
Re: 65/66 Cruise Control??
« Reply #3 on: September 29, 2011, 11:13:05 AM »
Looks like just a friction device that installs on the throttle pushrod and mechanically holds the throttle at 1 spot.  The car would slow going uphill and accelerate downhill.  Very crude but not as crude as a tennis-shoe!  :)      Not sure how it releases.
66 Metuch Conv
Nightmist, Std Blu Int
6T08C223904    76A       K         22       15c     21      6        6
                      BODY  COLOR   TRIM    DATE   DSO   AXLE  XMSN
   C/O  785                                   (rotation #)
   16    C14   6T08C223904        (weld bay 16, bucked MAR 14)

Offline carlite65

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2411
Re: 65/66 Cruise Control??
« Reply #4 on: September 29, 2011, 12:11:30 PM »
http://www.hammar.dyndns.org/~djhamma/options.htm

scroll down the page here. the instruction sheets are are on the left side.
5F09C331248

Offline C5ZZKGT

  • Gold Level Subscriber
  • Hero Member
  • *****
  • Posts: 787
Re: 65/66 Cruise Control??
« Reply #5 on: October 02, 2011, 01:22:52 PM »
It says right in the ad that it IS NOT for Mustangs, Fairlanes, Falcons, ect-may be it has something unique to big block engines or the bigger car lines of Ford.
I believe I've seen 1 or 2 of these in Galaxies.......not real sure what they are meaning about scouting around for parts so it can be used in a Mustang though......

Offline 5F09CNot4Sale

  • Full Member
  • ***
  • Posts: 195
  • If it does not fit, you need a bigger hammer!
Re: 65/66 Cruise Control??
« Reply #6 on: October 02, 2011, 03:35:00 PM »
Fred is correct, there is one for Mustangs and smaller Fords that starts with C4AZ. The C5AZ is for bigger Fords

5F09C3031XX Sept 28 64 Dearborn
5F07F1838XX June 29 64 Dearborn

Offline bryancobb

  • Silver Level Subscriber
  • Hero Member
  • ****
  • Posts: 1077
  • 2009 Ridn' Around
Re: 65/66 Cruise Control??
« Reply #7 on: October 02, 2011, 04:59:14 PM »
THX guys.  Didn't want one.  Just was curious.
66 Metuch Conv
Nightmist, Std Blu Int
6T08C223904    76A       K         22       15c     21      6        6
                      BODY  COLOR   TRIM    DATE   DSO   AXLE  XMSN
   C/O  785                                   (rotation #)
   16    C14   6T08C223904        (weld bay 16, bucked MAR 14)