Topic: Engine Tag- 69 H Code Location

[Buzz489]

Where and how is 1969 351W engine tag mounted to the engine? I have a late 69 351W 2V  PS/PB/AC. Any pictures?

[J_Speegle]

Attached to the engine with the same bolt that hols the dip stick tube and coil bracket

[STAUBY38]

Jeff   Is that also the location for a S code 390 San Jose build Mach engine tag?

C

[J_Speegle]

Jeff   Is that also the location for a S code 390 San Jose build Mach engine tag?

No. Different family of engines. Like 428 CJs that year its mounted with the coil bracket on top of the intake manifold drivers side

[STAUBY38]

Thanks !

[Buzz489]

So besides using the "dip/distributor" bolt, what is the placement of the tag? Is it up/down and was it originally bent at the factory in a particular way?

[Bob Gaines]

So besides using the "dip/distributor" bolt, what is the placement of the tag? Is it up/down and was it originally bent at the factory in a particular way?

I have seen them up or down . Up is probably more readable not bent in a particular way . If you are concerned about this nuance issue you may want to update the finish on bolts in the picture that would be at least as noticable if not more. The hold down bolt typically S7 zinc silver and intake bolts would be painted engine color along with the intake gaskets.Thermostat housing would be painted engine color. There are other things too.

[Buzz489]

Thank you all. At this time, I'm test fitting parts on the engine to just see what I need.